CrashDodson Posted July 31, 2019 Share Posted July 31, 2019 Im really tired of carrying around our steel walls and steel feet...setup is a one or two man show a lot of times. Considering making a few 2x2 walls as a test. I see in videos how the walls are supported/braced but I am unsure how the brace attaches to the wall. Are yall using some sort of hitch pin or quick disconnect of some sort? We have a lot of wind and if we leave our walls standing today that are made of steel tubing a strong wind will bend the legs of single walls which is another reason im looking to change. I want to be able to leave the walls up for weeks at a time. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted August 1, 2019 Share Posted August 1, 2019 (edited) Ever hefted a wall made with2x2s? There’s a reason we switched to our 3/4” steel tubing and snow fence setup. These things are light. We use three pieces of steel tubing welded to a flat piece of sheetmetal for the legs. Just drop the walls into the feet. Seldom need to stake them down, and there are no diagonals to trip over. What steel are you using that bends? Conduit or the like? Edited August 1, 2019 by MemphisMechanic Link to comment Share on other sites More sharing options...
Matt1911 Posted August 1, 2019 Share Posted August 1, 2019 3/4" steel tubing and plastic orange construction fence is what my local club uses. Easy to haul with only 1 person. Link to comment Share on other sites More sharing options...
CrashDodson Posted August 1, 2019 Author Share Posted August 1, 2019 I can measure ours in the morning. They are at least 3/4. They are heavy. We get 20 to 50mph winds. Really hard caliche ground the stands stay staked in legs bend about 18 inches from the ground. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted August 1, 2019 Share Posted August 1, 2019 (edited) Are the walls covered in something solid that catches the wind? 3/4” steel isn’t that strong in a six foot length. Snow fence material doesn’t catch the wind much. I think that’s crucial. Edited August 1, 2019 by MemphisMechanic Link to comment Share on other sites More sharing options...
Nathanb Posted August 1, 2019 Share Posted August 1, 2019 We use wood 2x2s due to a lack of willing welders. We break legs all the time. Like twice a season we end up repairing and rebuilding walls Link to comment Share on other sites More sharing options...
CrashDodson Posted August 1, 2019 Author Share Posted August 1, 2019 12 hours ago, MemphisMechanic said: Are the walls covered in something solid that catches the wind? 3/4” steel isn’t that strong in a six foot length. Snow fence material doesn’t catch the wind much. I think that’s crucial. Currently they are covered in a plastic lattice. Open like snow fence but a lot more rigid. This is likely adding a little to the weight and maybe catching some more wind. Link to comment Share on other sites More sharing options...
rishii Posted August 1, 2019 Share Posted August 1, 2019 1 hour ago, CrashDodson said: Currently they are covered in a plastic lattice. Open like snow fence but a lot more rigid. This is likely adding a little to the weight and maybe catching some more wind. Our range is windy 20-30mph is not unusual we tried 2x2 with plastic lattice, you’re right they’re heavy and act like a sail currently we use 2x2 wood frames and snow/construction fence, it’s a lot lighter, doesn’t catch as much wind, but they will still blow over For the feet, we use a mix of round tubing welded to steel flat stock about 2’ long with holes drilled on each end to stake and 2” square sign post tubing all of our feet have a single, double or triple hole which allows for various wall configuration Link to comment Share on other sites More sharing options...
CrashDodson Posted August 1, 2019 Author Share Posted August 1, 2019 maybe i will stick with the metal....replace the lattice. Im also thinking about trying to come up with a easily removable brace for the current metal walls that I could use to leave the walls up for an extended period. I am hoping if I brace both ends, use a lag bolt to anchor the brace to the ground I could avoid having to pound stakes in each wall foot. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now