obsessiveshooter Posted May 27, 2019 Author Share Posted May 27, 2019 Nice, I'll remove the mag release and try that out. I'm glad you had the same issue and found the fix. To be clear, you didn't just polish the mag release where the mags hit it, you trimmed it down so it would release sooner and be more out of the way? BTW, does your ejector have a bend to the left and have you had any failure to eject issues? I'm hoping Carlos will help me out. If they have updated the design due to known issues, then I would love it if they sent me that updated design. I'll email him now! Link to comment Share on other sites More sharing options...
vizsladog Posted May 28, 2019 Share Posted May 28, 2019 Yes. I had to remove material from the mag release .just sanded it and filed it very lightly until the dropped free. I will check mine to see if it has the bend. Link to comment Share on other sites More sharing options...
vizsladog Posted May 28, 2019 Share Posted May 28, 2019 Its not really a known issue. Some people just dont like the way the saftey tab works or is located. Link to comment Share on other sites More sharing options...
jesseskinner Posted May 29, 2019 Share Posted May 29, 2019 On 3/11/2019 at 2:06 PM, obsessiveshooter said: The pistol uses metal MEC gar made magazines that can be bought for about $25. They drop free. I handled one today, and am impressed for the money. I do not want to pay the $50 each I found online for extra mags. Do you have a link to the $25 mags? Respectfully, Link to comment Share on other sites More sharing options...
obsessiveshooter Posted May 29, 2019 Author Share Posted May 29, 2019 I handled one today, and am impressed for the money. I do not want to pay the $50 each I found online for extra mags. Do you have a link to the $25 mags? Respectfully, When I bought the pistol I had the shop order in 3 more mags for me. That was their price. I just told my phone to search for sar9 magazine in the first thing that came up was prepper gun shop for $26 each.Sent from my SM-N960U using Tapatalk Link to comment Share on other sites More sharing options...
obsessiveshooter Posted May 29, 2019 Author Share Posted May 29, 2019 After emailing with Freedomsmith, there are no plans to make a racer trigger or updated design. So, I have chamfered my trigger on the sides, and I may actually remove the bottom portion of the trigger that sticks out. I think most of the time my issue is when I'm too low on the trigger and I put pressure on that part instead of the dingus. Sent from my SM-N960U using Tapatalk Link to comment Share on other sites More sharing options...
Cc223316 Posted July 18, 2019 Share Posted July 18, 2019 Hey brother can you recall what size the sights you ordered? Link to comment Share on other sites More sharing options...
LT_USN_Ret Posted May 28, 2020 Share Posted May 28, 2020 On 7/18/2019 at 2:06 PM, Cc223316 said: Hey brother can you recall what size the sights you ordered? Any info on the front size used would be great. Link to comment Share on other sites More sharing options...
obsessiveshooter Posted June 6, 2020 Author Share Posted June 6, 2020 Sorry, I let this toy go to a new home. I cant find any records of what I ordered either. Sent from my SM-N960U using Tapatalk Link to comment Share on other sites More sharing options...
madmax20 Posted September 26, 2020 Share Posted September 26, 2020 I found that the stock holster that came in the box with my Canik tp9sfx actually fits the Sar9 better (less rattle, good retention) than it does the Canik. The holsters on tp9sfx have undergone some changes. I think mine is most recent. Doesn't come with separate paddle, just 1 piece with 2 clips. would sure like to get some of the grit out of Sar9 trigger without big overhaul. ??? Link to comment Share on other sites More sharing options...
mpolans Posted September 27, 2020 Share Posted September 27, 2020 If the top end is basically like a Glock, I wonder if a G35 or G24 top end would fit? Link to comment Share on other sites More sharing options...
Deadkurt1 Posted December 26, 2020 Share Posted December 26, 2020 What sites did you use for the rear and where can I find some sites no aftermarket brand makes them. Link to comment Share on other sites More sharing options...
Deadkurt1 Posted December 26, 2020 Share Posted December 26, 2020 I cannot find any aftermarket sights for my SAR9. Would love to put something different on. I have no idea where to find anything for it Link to comment Share on other sites More sharing options...
verla Posted December 27, 2020 Share Posted December 27, 2020 If you are looking for a different holster try Concealment Express, they may have one and they are reasonably priced. Link to comment Share on other sites More sharing options...
Eddie74 Posted July 30, 2021 Share Posted July 30, 2021 Do you think a sig p320 extended mag can work for the sar usa 9? Link to comment Share on other sites More sharing options...
SilentX Posted December 26, 2021 Share Posted December 26, 2021 What generation of glock guide rods and trigger connectors fit? Link to comment Share on other sites More sharing options...
Ohvall Posted January 4, 2022 Share Posted January 4, 2022 The SAR9 magazines look very similar to CZ P-10 magazines. Does anyone know if CZ mags will fit and function in a SAR9? Link to comment Share on other sites More sharing options...
Xander131 Posted January 21, 2022 Share Posted January 21, 2022 Anybody know of any threaded barrels or barrel adapters that would would for the sar9? Want to test out different muzzle devices but have hit a dead end on my knowledge. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now