oteroman Posted December 9, 2018 Share Posted December 9, 2018 RE: Too many nose down BulletsI picked up a few K of these bullets I can’t seem to adjust the bullet feeder to get reliable nose up. They are very slick and have a bevel base. Curious if anyone has good experience with this bullet? Sent from my iPhone using Tapatalk Pro Link to comment Share on other sites More sharing options...
Dirtchevy841 Posted December 10, 2018 Share Posted December 10, 2018 I be run these before. Adjust the ladder piece to where it’s a little more than half that it rides up. Should be enough to upright it correctly. Link to comment Share on other sites More sharing options...
oteroman Posted December 11, 2018 Author Share Posted December 11, 2018 Got it working. Revisited the factory video on adjustments. Thanks Sent from my iPhone using Tapatalk Pro Link to comment Share on other sites More sharing options...
Dirtchevy841 Posted December 12, 2018 Share Posted December 12, 2018 Just take the plate out every now and then and clean. Gets a little dirty with these bullets Link to comment Share on other sites More sharing options...
Laxman2809 Posted January 2, 2019 Share Posted January 2, 2019 Also check at what slant in degrees your MBF is to ensure proper operation. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted January 2, 2019 Share Posted January 2, 2019 1 hour ago, Laxman2809 said: Also check at what slant in degrees your MBF is to ensure proper operation. This. Keeping it 50+ degrees instead of 45ish or below? Very helpful. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now