xagent Posted September 2, 2017 Share Posted September 2, 2017 I polished my PSA stock trigger and put in the JP yellow springs. It felt pretty good but I was getting about 1 in 10 light strikes. I put in the original springs and no problems except for the weight. The HF 24c is nice but a bit pricey for me at this time. What about their EDT,2,3 or something else? Any recommendations? Link to comment
reg3 Posted September 2, 2017 Share Posted September 2, 2017 Have you tried it with the stock hammer spring and the JP trigger spring? Link to comment
xagent Posted September 2, 2017 Author Share Posted September 2, 2017 I haven't tried that. Link to comment
Amra86 Posted September 2, 2017 Share Posted September 2, 2017 You can remove the hook or tail off the back of the hammer. This will lighten the hammer and allow it to strike with more speed with the JP hammer spring. Take a look at a JP hammer to see how it compares to a stock hammer. Link to comment
alvinsmith75 Posted September 3, 2017 Share Posted September 3, 2017 If using the JP springs you need to buy the enhanced reliability springs I believe they're called. It is a red hammer spring and the yellow/gold trigger spring. Link to comment
Flatland Shooter Posted September 3, 2017 Share Posted September 3, 2017 (edited) What primers are you using? I installed the non-adjustable JP roller trigger and yellow springs (kept the PSA disconnector and hammer) and have no problem lighting off CCI and Winchester primers. I've not shot any factory ammo with this lower. Edited September 3, 2017 by Flatland Shooter Link to comment
gatortommy Posted September 4, 2017 Share Posted September 4, 2017 Primers. I use a milspec LPK with the JP light springs and with CCI I'll get a FTF about once in every 4-500 rounds. Tula/Wolf run 100%. Trigger pull is just under 3 pounds. Link to comment
xagent Posted September 4, 2017 Author Share Posted September 4, 2017 I use Federal and CCI, had problems with both. Link to comment
igolfat8 Posted September 5, 2017 Share Posted September 5, 2017 (edited) On September 2, 2017 at 1:57 PM, xagent said: The HF 24c is nice but a bit pricey for me at this time. What about their EDT,2,3 or something else? I have a HF 24c for sale in the classifieds. Used less than 100 rounds down the pipe Edited September 5, 2017 by igolfat8 Link to comment
Hallz Posted September 6, 2017 Share Posted September 6, 2017 I run the full JP armagedon trigger kit with yellow springs and federal small rifle primers, no light strikes. all spp go bang!. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now