jmorris Posted August 19, 2016 Share Posted August 19, 2016 380 shot shells. First step is to turn the .223 case back and I built a little fixture to trim them to .980" http://i664.photobucket.com/albums/vv5/qvideo/gn/380ss/IMG_20160817_145519_219_zpsqjqwhubb.jpg[/img] Once locked into the fixture I rough cut them long then hit it on a disk sander that gets it to .980"http://i664.photobucket.com/albums/vv5/qvideo/gn/380ss/IMG_20160817_133731_490_zpsey1x6sp6.jpg[/img] I used Winchester SPP to ignite the N310 under a cardboard wad with 60 grains of #12 shot (about 250 pellets), then a plastic overshot card crimped in place using an old RCBS 45 ACP round nose seat die. http://i664.photobucket.com/albums/vv5/qvideo/gn/380ss/IMG_20160817_161719_347_zpsms68hftg.jpg[/img] Not the best pattern in the world but not too bad with the small payload. http://i664.photobucket.com/albums/vv5/qvideo/gn/380ss/IMG_20160817_152658_229_zpsorotgntf.jpg[/img] Even cycles the pistol, here is a video. [video=youtube;rAIcV5CR7eM]https://www.youtube.com/watch?v=rAIcV5CR7eM[/video] Link to comment Share on other sites More sharing options...
jmorris Posted August 19, 2016 Author Share Posted August 19, 2016 We don't have a test area and youngeyes was wanting an example of posting issues. The above is a cut and paste of post #8 of this thread. http://castboolits.gunloads.com/showthread.php?313844-380-shot-shells Link to comment Share on other sites More sharing options...
JD45 Posted August 19, 2016 Share Posted August 19, 2016 The links aren't clickable, but if you made it work that is too cool! Link to comment Share on other sites More sharing options...
jmorris Posted August 19, 2016 Author Share Posted August 19, 2016 Yeah, that's the issue. Is the link in the 2nd post also dead? Link to comment Share on other sites More sharing options...
Sarge Posted August 19, 2016 Share Posted August 19, 2016 It worked for me. Link to comment Share on other sites More sharing options...
Youngeyes Posted August 19, 2016 Share Posted August 19, 2016 I just did a ctrl C and ctrl V.... We don't have a test area and youngeyes was wanting an example of posting issues. The above is a cut and paste of post #8 of this thread. http://castboolits.gunloads.com/showthread.php?313844-380-shot-shells Link to comment Share on other sites More sharing options...
NicVerAZ Posted August 19, 2016 Share Posted August 19, 2016 Castboolits is a fascinating forum, to say the least Link to comment Share on other sites More sharing options...
RDA Posted August 22, 2016 Share Posted August 22, 2016 (edited) REPOSTED FOR JMORRIS 380 shot shells. First step is to turn the .223 case back and I built a little fixture to trim them to .980" Once locked into the fixture I rough cut them long then hit it on a disk sander that gets it to .980" I used Winchester SPP to ignite the N310 under a cardboard wad with 60 grains of #12 shot (about 250 pellets), then a plastic overshot card crimped in place using an old RCBS 45 ACP round nose seat die. Not the best pattern in the world but not too bad with the small payload. Even cycles the pistol, here is a video. Edited August 22, 2016 by RDA Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now