Glockster35 Posted July 26, 2007 Share Posted July 26, 2007 I know I am reviving a dead post, but LoneWolf Distributing is getting ready to produce slides in the next few months for those of you interested. Link to comment Share on other sites More sharing options...
open17 Posted July 26, 2007 Share Posted July 26, 2007 I know I am reviving a dead post, but LoneWolf Distributing is getting ready to produce slides in the next few months for those of you interested. Hmmmm. Just checked their website. 17 and 22 slides, Stainless, available August 1st. Target retail $175!! Looks like I need to call Lone Wolf tomorrow. Link to comment Share on other sites More sharing options...
Coolduckboy Posted July 26, 2007 Share Posted July 26, 2007 I think this is a great idea and support it 100%. I believe that Glocks in open would become more existent and more available. I will be sending them an e-mail. Link to comment Share on other sites More sharing options...
Glockster35 Posted July 26, 2007 Share Posted July 26, 2007 They plan to releaase other versions later, they just have to tool them up and test them first! I am looking at a 24 slide once they release them! Link to comment Share on other sites More sharing options...
Charlie Vanek Posted July 26, 2007 Share Posted July 26, 2007 Talked to JR at Lone Wolf and I will have a G17 slide just as soon as he takes delivery on them. I'm really looking forward to testing these new slides. Link to comment Share on other sites More sharing options...
Jim Taylor Posted July 26, 2007 Share Posted July 26, 2007 Just a heads up that CCF RaceFrames is in validation (pre-production) phase for their aftermarket Glock slides. Looks like about 2 months until they will be available for shipment. Also, magwells are in the works. Prototype finished and under evaluation. And, last, but not least, there is a barrel program. Best regards, Jim Taylor PS: My CCF project is moving nicely. I have Caspian 35 slide built up, except for barrels (40S&W and 9mm) which are due in by the weekend or Monday. Put Dave Sevigny's Competition Sights on the slide. This is a nice looking set-up. Shot the G17 upper on the Monday night indoor match. Nice, nice, nice. Link to comment Share on other sites More sharing options...
Glockster35 Posted July 26, 2007 Share Posted July 26, 2007 So, CCF is planning to make full out firearms...or at least the majoirty of the pieces to complete a build. That sounds great! Link to comment Share on other sites More sharing options...
Glockster35 Posted August 15, 2007 Share Posted August 15, 2007 (edited) Lone Wolf G22 Slides are for sale, visit the thread on GlockTalk for details, JR has offered a decent discount for those that jump on it early! Glock Talk thread Edited August 15, 2007 by Glockster35 Link to comment Share on other sites More sharing options...
dagz Posted August 28, 2007 Share Posted August 28, 2007 Can anyone please share his experience/info on the LWD G22 slide? Thank you very much. Link to comment Share on other sites More sharing options...
Glockster35 Posted August 28, 2007 Share Posted August 28, 2007 Dagz, Try the forum over at GlockTalk, there are a ton of people who have bought them, and I am sure that by now there have been posts about them. I haven't been over there for a bit myself though! Link to comment Share on other sites More sharing options...
dagz Posted August 29, 2007 Share Posted August 29, 2007 (edited) Glockster! I also posted in GT but so far there are no takers. I was hoping I can find answers here. Thanks. Edited August 29, 2007 by dagz Link to comment Share on other sites More sharing options...
Glockster35 Posted August 30, 2007 Share Posted August 30, 2007 I went there too, and was to see not one post from someone who has purchased the slides. If they had started with the Glock 35 slide, I would have bit, and posted a review, but I have no need for a Glock 22 slide right now! Link to comment Share on other sites More sharing options...
Intel6 Posted August 30, 2007 Share Posted August 30, 2007 I am waiting (hopefully not in vain) for the large frame long slides. a 6" 10mm G20 is all I need. Neal in AZ Link to comment Share on other sites More sharing options...
Glockster35 Posted August 30, 2007 Share Posted August 30, 2007 Lone Wolf does plan on making them, so they are probably on the list of slides to build. Ask JR at Lone Wolf for the timeframe on design and delivery! Link to comment Share on other sites More sharing options...
matt2ace Posted August 30, 2007 Share Posted August 30, 2007 (edited) I have been shooting a G22 open gun with a Caspian/Shuemann hybrid barrel for about 5 years now. 10,000+ rounds without any problems with the gun. Have a Vanek trigger in the plastic gun, but move to a CCF frame (2K+ rounds to date without a problem) this year. Here's a few pix of the CCF version and one of the polymer frame version along with my G24 40 open gun (converting to 9 major as you read this). Slides are from Glock, Millenium-Kr nickle plated, modified by High-Gear Race Guns (port holes, extended slide opening on G24, fit JPoint sites to slide). Edited August 30, 2007 by matt2ace Link to comment Share on other sites More sharing options...
Glockster35 Posted August 31, 2007 Share Posted August 31, 2007 Those are both very nice looking, and I am sure very accurate pistols. I love the slide treatments! Link to comment Share on other sites More sharing options...
DanM Posted September 4, 2007 Share Posted September 4, 2007 (edited) I have been shooting a G22 open gun with a Caspian/Shuemann hybrid barrel for about 5 years now. 10,000+ rounds without any problems with the gun. Have a Vanek trigger in the plastic gun, but move to a CCF frame (2K+ rounds to date without a problem) this year. Here's a few pix of the CCF version and one of the polymer frame version along with my G24 40 open gun (converting to 9 major as you read this). Slides are from Glock, Millenium-Kr nickle plated, modified by High-Gear Race Guns (port holes, extended slide opening on G24, fit JPoint sites to slide). I WANT one of those uppers. I tried pulling up their site and it isn't working. Do you have any contact info? Edit: I found it in the cached version. Edited September 4, 2007 by DanM Link to comment Share on other sites More sharing options...
dglock9 Posted September 4, 2007 Share Posted September 4, 2007 (edited) I have been shooting a G22 open gun with a Caspian/Shuemann hybrid barrel for about 5 years now. 10,000+ rounds without any problems with the gun. Have a Vanek trigger in the plastic gun, but move to a CCF frame (2K+ rounds to date without a problem) this year. Here's a few pix of the CCF version and one of the polymer frame version along with my G24 40 open gun (converting to 9 major as you read this). Slides are from Glock, Millenium-Kr nickle plated, modified by High-Gear Race Guns (port holes, extended slide opening on G24, fit JPoint sites to slide). Wow, those are some sweet looking blasters - perfectly suited for my taste! Have you had any problem with the major PF and your JPoints? Anything special done to the Jpoints to help them hold up to the recoil? The High-Gear Race Gun site that I found is http://highgearraceguns.com I've googled, but I can't find anything on the Caspian/Schuemann hybrid barrels. And man, the Caspian Arms website truly sucks. Edited September 4, 2007 by domzilla9 Link to comment Share on other sites More sharing options...
DanM Posted September 5, 2007 Share Posted September 5, 2007 I googled the barrel for a half-hour as well. Anyone? Link to comment Share on other sites More sharing options...
dglock9 Posted September 5, 2007 Share Posted September 5, 2007 I googled the barrel for a half-hour as well. Anyone? I think KKM is still making a Hybrid glock barrel but I dunno about anyone else Link to comment Share on other sites More sharing options...
matt2ace Posted September 6, 2007 Share Posted September 6, 2007 (edited) I googled the barrel for a half-hour as well. Anyone? I think KKM is still making a Hybrid glock barrel but I dunno about anyone else The G22 came to me almost by accident. I good friend and gunsmith sold it to me about 5 years ago without any internals. I know several people at Caspian (I lived an hour from the factory) who told me that the barrel is no longer made by anyone and I would have order a custom barrel if I ever need a replacement. I shoot 6.7gr Power Pistol, 180gr MGD RN bullet, 1.125OAL. Gun makes 167-170PF without fail. I am a dedicated Jpoint user, never (ever) had a problem with those sites sitting on the slide. Site adjustment is not as fine as the DrDot, but they offer 1-degree spacers that help with sight adjustment. The only other complaint about JPoint is that you have to demount the site to replace the battery (very long life though). You must be sure to sight-in when remounting the sight....I was off to the right by 5 inches at my last match because I did not check sight-in after replacing the battery for the first time in 3 years. The gun tracks up/down pretty well on the CCF frame, not quite as flat as a SV or STI, but cost a LOT less. I am converting the G24 to 9mm major this week to see how that does. The G24 was a great gun in 40, very flat, very accurate. I broke 2 barrel lugs trying to fit it to the CCF frame (my own fault, not the CCF or the barrel) so I am back on the plastic frame in 9mm major. Shooting the G22 in minor PF is amazing. Flat, soft and a real tack-driver. I use factory 40 or my G35 IPSC limited load making 140-145PF in the open gun. A great combination for steel matches. Edited September 6, 2007 by matt2ace Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now