V2plus25 Posted November 4, 2018 Share Posted November 4, 2018 During the update I did not unplug anything. Everything remained plugged in and turned on. The top screen appears whenever I just have the tablet ON but the autodrive OFF. The bottom screen appears when I have the tablet ON and the autodrive ON (actually there's ~5 second delay before the screens switch) Below is the list of files that are on my SD card. However this is for the 1050 PRO upgrade... yours might be different. Check out this Mark 7 Support page to get the exact software update ZIP file you need for your autodrive. Plus they have detailed installation instructions. Link to comment Share on other sites More sharing options...
msg.drew Posted November 4, 2018 Share Posted November 4, 2018 Unfortunately I'm still not approved for the support page. I talked to them on Friday afternoon. The files they sent out to me look like the bottom 3. Link to comment Share on other sites More sharing options...
slavex Posted November 5, 2018 Share Posted November 5, 2018 delete all the old files, only have the current, needed, upgrade files on the card. Link to comment Share on other sites More sharing options...
msg.drew Posted November 5, 2018 Share Posted November 5, 2018 Unfortunately they think something is broken I just got this last week, second hand no warranty... Flordia to Canada looks like it's going back to Florida. All the software is up to date... as far as I can tell. The issue lies with the firmware I'm pretty sure. Link to comment Share on other sites More sharing options...
Grandpoobah Posted December 28, 2018 Share Posted December 28, 2018 (edited) Hi Foxbat: This is your lucky day. Suggest you remove roll pin from your primer slide and open your Dillon seating die and remove the seating die stem pin. Notice that it is the same diameter as the vacuum hose "bearing". Place in primer slide - you now have a hardened steel roller bearing that is the exact size required. It remains in place once the slide is placed in the slide channel. The last step is to call Dillon and secure a replacement #14434 seating die stem pin - the last price was $3.79. No more rubber auto vacuum hose. New replacement slide with bronze roller close to $100.00 - stem pin $3.79. Grandpoobah Edited December 28, 2018 by Grandpoobah Link to comment Share on other sites More sharing options...
Grandpoobah Posted January 13, 2019 Share Posted January 13, 2019 Hi Foxbat: This is your lucky day. Suggest you remove roll pin from your primer slide and open your Dillon seating die and remove the seating die stem pin. Notice that it is the same diameter as the vacuum hose "bearing". Place in primer slide - you now have a hardened steel roller bearing that is the exact size required. It remains in place once the slide is placed int the slide channel. The last step is to call Dill and secure a replacement #14434 seating die stem pin - the last price was $3.79. No more rubber auto vacuum hose. New replacement slide with bronze roller close to $100.00 - stem pin $3.79. Grandpoobah Link to comment Share on other sites More sharing options...
dan46n2 Posted August 7, 2020 Share Posted August 7, 2020 (edited) On 11/5/2018 at 1:48 PM, msg.drew said: Unfortunately they think something is broken I just got this last week, second hand no warranty... Flordia to Canada looks like it's going back to Florida. All the software is up to date... as far as I can tell. The issue lies with the firmware I'm pretty sure. I just set up my 1050 Autodrive for the first time and got the same issue. This was ordered new a few years ago, haven't gotten around to it till now. I updated the firmware and software but it won't get past the warning screen and the accept and deny buttons dont come up. Also tried to power cycle the MCU, unplugged cables and replugged. Edited August 8, 2020 by dan46n2 Link to comment Share on other sites More sharing options...
dan46n2 Posted August 8, 2020 Share Posted August 8, 2020 Got it fixed, it was a loose pin on the 6 pin power connector. Have to say their customer service is great I got a response in like 20 minutes and fixed the issue! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now