bmiller Posted March 7, 2017 Share Posted March 7, 2017 (edited) 31 minutes ago, lynn jones said: I put a Hyperfire trigger in my PCC and I had burst a couple of time this weekend. I have a New Frontier lower with a JP bolt and JP captured recoil spring. Do you have it set up for the lightest trigger pull? I have seen people have problems with the gun bump firing if they hold it loosely. Edited March 7, 2017 by bmiller Link to comment Share on other sites More sharing options...
lynn jones Posted March 7, 2017 Share Posted March 7, 2017 I have the middle weight springs on the trigger. I couldn't get the non-colored springs to work. Link to comment Share on other sites More sharing options...
Brickdawg1 Posted May 20, 2017 Share Posted May 20, 2017 I ran across this thread over the last few weeks about the velocity not working in AR9's with ramped bolts. I completed my AR9 build today (spikes tactical lower w/LRBHO, psa upper, faxon 8.5", psa g-9 hybrid bolt, .308 spring, normal pistol buffer, velocity 3lb curved) and through the first 300+ rounds she purs like a kitten. No issues resetting what so ever. Link to comment Share on other sites More sharing options...
Tampa-XD45 Posted May 22, 2017 Share Posted May 22, 2017 Velocity specifically states "*Do not use with 9mm conversion or open bolt face" on their website. I've used a Velocity trigger in a 9mm SBR with ramped bolt and it will double fire after firing about 300 rounds. Using their 4 lb spring will help with the problem. Link to comment Share on other sites More sharing options...
Brickdawg1 Posted May 22, 2017 Share Posted May 22, 2017 I'm right there on that threshold. I'll report back if she starts double firing. What lower/BCG/spring/Buffer were you running Tampaxd45? Link to comment Share on other sites More sharing options...
Whoops! Posted May 23, 2017 Share Posted May 23, 2017 The Franklin Armory BFSIII works incredibly well in my PSA AR-9. Mil-Spec hammer shape. Link to comment Share on other sites More sharing options...
mike4045 Posted May 23, 2017 Share Posted May 23, 2017 17 hours ago, Tampaxd45 said: Velocity specifically states "*Do not use with 9mm conversion or open bolt face" on their website. I've used a Velocity trigger in a 9mm SBR with ramped bolt and it will double fire after firing about 300 rounds. Using their 4 lb spring will help with the problem. I found out about it after I ordered it. I had reset issues. I put it in an extra 223. Using POF in my gun now. No more issues. Link to comment Share on other sites More sharing options...
Tampa-XD45 Posted May 23, 2017 Share Posted May 23, 2017 re: Brickdawg1 "What lower/BCG/spring/Buffer were you running" PSA lower standard 3 oz buffer standard buffer spring CMMG 9MM Ramped 7" barrel Link to comment Share on other sites More sharing options...
judgecrater Posted October 15, 2019 Share Posted October 15, 2019 (edited) On 3/7/2017 at 3:41 PM, lynn jones said: I started with a CMC and it would not reset, so I went with the Hyperfire. I started with an Elftmann and it would not reset. My CMC is perfect and half the price. Was your CMC specifically advertised as an AR9 trigger. AR15 triggers normally will not run in a blowback gun. Edited October 15, 2019 by judgecrater addition Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now