Mikelindsey Posted March 7, 2015 Share Posted March 7, 2015 Are there others that have a hard time getting the powder check working 100% of the time? Link to comment Share on other sites More sharing options...
bluevic443 Posted March 7, 2015 Share Posted March 7, 2015 Yes, me too. Works perfect with all the pistol calibers i am loading. When i got into reloading. 223 I was having a hell of a time getting it set to where it would not go off or just churp when set, would take the case and weight the powder, perfect charge weight was dispenced. So I watched it as I cycled the press, this is what I found with mine: 1. The brass tip on the 223 size rod was not running true to the upper peice that trips the switch. This caused the brass tip to drag and give a false trip as it went into the case mouth. Much more clerance on pistol brass. 2. The brass tip is champfered and needs a greater transition from the tip to the sides. Will help the problem #1. Still want as much of a flat tip as posible so the tip does not become a speer and plunge into the powder at a radom depth. 3. I do not sort my processed brass by head stamp. So case volume is going to influance powder height in the case. Same problem with small pistol brass, just not outside the "V" groove adjustment. Solutions: Ideas that I have thought of but, have not tried because my lathe is in storage. 1. True the runout of the brass tip to the aluminum "V" block. The tip has to inter the case mouth as centered as possible and not drag on the sides. 2. Round the chamfer on the side only if needed after fix #1. 3. Make a new aluminun "V" block with a longer "V" groove that will fit the high low average of the mixed head stamp brass, but will still catch a gross powder error. Sense I can't fix the problem I took the powder check rod out and loaded on. Just weigh my charges more often. I like the added safety the powder check gives with pistol loads, and will have it on my rifle loads ASAP. Link to comment Share on other sites More sharing options...
RiggerJJ Posted March 8, 2015 Share Posted March 8, 2015 (edited) Using mixed 223 (or 308) brass you will be hard pressed to get the powder check to work as advertised. My suggestion is to look in each case as you place a bullet for seating. I trust a visual much more than a powder check die, but that's just me...been doing it for years with no problems. jj Edited March 8, 2015 by RiggerJJ Link to comment Share on other sites More sharing options...
StealthyBlagga Posted March 8, 2015 Share Posted March 8, 2015 (edited) Powder Check works great for me. It is flawless for same-headstamp brass, and works fine the vast majority of the time even with mixed brass. The trick is to modify the sensing tip so it passes through the narrow case neck more smoothly. Chuck the tip up in a drill press and shape it with a file/abrasive paper to match the profile below (original on the left, modified on the right): Edited March 8, 2015 by StealthyBlagga Link to comment Share on other sites More sharing options...
RDA Posted March 8, 2015 Share Posted March 8, 2015 I am able to get mine adjusted really well and it alerts me to low/high charges properly (and mine is unmodified). Link to comment Share on other sites More sharing options...
StealthyBlagga Posted March 9, 2015 Share Posted March 9, 2015 I just modified one for Mike to try. Here is a time-lapse video showing the process: Link to comment Share on other sites More sharing options...
Mikelindsey Posted March 9, 2015 Author Share Posted March 9, 2015 Thanks Stealthy. Great video. He has figured out a problem many of us have. Dillon could take a note here. Link to comment Share on other sites More sharing options...
anm2_man Posted March 9, 2015 Share Posted March 9, 2015 I'm with RDA, I've never had a problem with the rod missing the mouth of the case. However, I've made a lot of adjustments due to the mixed case issue. The powder level can vary quite a bit. But the powder check is really there to catch a powder drop malfunction, not to check each loads weight. Link to comment Share on other sites More sharing options...
Henny Posted March 12, 2015 Share Posted March 12, 2015 I am able to get mine adjusted really well and it alerts me to low/high charges properly (and mine is unmodified). Same here. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now