Antti Posted May 21, 2014 Share Posted May 21, 2014 I'm about to order new barrel to old blaster. Current is 38 sa v12, it runs well but takes almost 10 gr 3n38 to make major and it is difficult to get brasses in here. Options are Caliber 38 sa or sc or 9x19 (not sure if all are available) Number of pop holes 0 to 8 With or without comp Am I getting troube if i take 9mm without pop holes? Antti Link to comment Share on other sites More sharing options...
kneelingatlas Posted May 21, 2014 Share Posted May 21, 2014 Antti, I know exactly what you mean with the Gold Team, I had one in 9mm, I prefer 9mm over 38 just because of the cost and hassle of 38 and it sounds like you're leaning the same way. You could just change the barrel to one with no holes and use it with the existing comp, but unfortunately that little two port comp leaves much to be desired (which is why they drilled 12 holes in the barrel ). I think the best solution is a barrel with no holes and a comp with a modern design and at least three ports, then you could drill a few holes as you saw fit to flatten it out. Link to comment Share on other sites More sharing options...
Nealio Posted May 21, 2014 Share Posted May 21, 2014 Where can you get a barrel? :) Link to comment Share on other sites More sharing options...
MangledMoose Posted May 22, 2014 Share Posted May 22, 2014 Would the comp off of a checkmate work? Link to comment Share on other sites More sharing options...
kneelingatlas Posted May 22, 2014 Share Posted May 22, 2014 Would the comp off of a checkmate work? No, the cone is too small and the barrel of a CM is 14mm OD and the GT barrel is 15mm OD. Link to comment Share on other sites More sharing options...
Antti Posted May 22, 2014 Author Share Posted May 22, 2014 Where can you get a barrel? :) Directly from Tanfoglio Italy, I live in Europe. I'm not sure if price is from this world but I'll know it soon. Antti Link to comment Share on other sites More sharing options...
Duke Nukem Posted May 22, 2014 Share Posted May 22, 2014 Can you get a 9x19 bigstick (170mm Magazine)? Link to comment Share on other sites More sharing options...
kneelingatlas Posted May 22, 2014 Share Posted May 22, 2014 Can you get a 9x19 bigstick (170mm Magazine)? The need to be custom welded Link to comment Share on other sites More sharing options...
george76904 Posted May 23, 2014 Share Posted May 23, 2014 Can you get a 9x19 bigstick (170mm Magazine)?The need to be custom weldedIs anyone in the states in need of a 170mm witness mag? Link to comment Share on other sites More sharing options...
Nealio Posted May 23, 2014 Share Posted May 23, 2014 Can you get a 9x19 bigstick (170mm Magazine)?The need to be custom weldedIs anyone in the states in need of a 170mm witness mag? Yes, are you and your dad making them? Link to comment Share on other sites More sharing options...
kneelingatlas Posted May 23, 2014 Share Posted May 23, 2014 Is anyone in the states in need of a 170mm witness mag? I'd be interested... Link to comment Share on other sites More sharing options...
george76904 Posted May 25, 2014 Share Posted May 25, 2014 Yes we have been making a few and after testing in various conditions and over time they have held up beautifully so we decided we could offer if anyone needed any. Link to comment Share on other sites More sharing options...
Nealio Posted May 25, 2014 Share Posted May 25, 2014 Price? Link to comment Share on other sites More sharing options...
george76904 Posted May 26, 2014 Share Posted May 26, 2014 Depends we haven't really talked about price... But I guess it would depend on if it was just the tube or a complete magazine and whose basepads was used. Link to comment Share on other sites More sharing options...
george76904 Posted May 26, 2014 Share Posted May 26, 2014 OK we have discussed pricing and have decided on 1 170mm tube being $85 or 1 170mm tube and 1 not quite 170mm tube (like 150) tube for 110. Link to comment Share on other sites More sharing options...
Nealio Posted May 27, 2014 Share Posted May 27, 2014 (edited) So are these measurements with an extended basepad or running a +0 basepad? Edited May 27, 2014 by Nealio Link to comment Share on other sites More sharing options...
george76904 Posted May 28, 2014 Share Posted May 28, 2014 So are these measurements with an extended basepad or running a +0 basepad? These are 170mm with an extended basepad Link to comment Share on other sites More sharing options...
kneelingatlas Posted May 28, 2014 Share Posted May 28, 2014 So are these measurements with an extended basepad or running a +0 basepad? These are 170mm with an extended basepad How many rounds are you getting with a Henning/Grams follower? Link to comment Share on other sites More sharing options...
george76904 Posted May 28, 2014 Share Posted May 28, 2014 28-29 rounds of 9mm. And we have never had any problems with them.*knock on wood* Link to comment Share on other sites More sharing options...
Nealio Posted May 28, 2014 Share Posted May 28, 2014 (edited) so the 2nd mag, it has to be longer than 150mm with a basepad doesn't it? That's only 10mm more than a standard mag. How many rounds does it hold Edited May 28, 2014 by Nealio Link to comment Share on other sites More sharing options...
george76904 Posted May 28, 2014 Share Posted May 28, 2014 With the H-500 pad we can get 25 or 26 in it. I have not tried it with the H-141 pad but I will later tonight. Link to comment Share on other sites More sharing options...
Antti Posted May 29, 2014 Author Share Posted May 29, 2014 Where can you get a barrel? :) Directly from Tanfoglio Italy, I live in Europe. I'm not sure if price is from this world but I'll know it soon. Antti Price is 250€. Not bad, I expected +400. Still bit curious about freight price, because in Europe guns and gun parts are evil and there are not so many companies which transport those... Link to comment Share on other sites More sharing options...
BeerBaron Posted May 30, 2014 Share Posted May 30, 2014 that price for new barrel, is it with holes? with comp? Link to comment Share on other sites More sharing options...
Antti Posted May 30, 2014 Author Share Posted May 30, 2014 that price for new barrel, is it with holes? with comp? New barrel without holes and comp. I assume that they will hire a jet for delivery because it was 250€ as well... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now