deerassassin22 Posted December 29, 2013 Share Posted December 29, 2013 I think I might start shooting production I want a 2nd opinion on my setup here to make sure I'm KOSHER. 1. XDM 5.25 40 Cal 2. Dawson ICE Magwell (USPSA/IDPA) legal one. 3. Tungsten Guide Rod/with 1911 Rcoil Springs 4. Blade Tech DOH Black Ice Holster 5. DAA Mag Pouches 6. Total Weight with Empty Mag is 2lb 1.2oz (33.2oz) That's with my Dawson Plus 2/3 Extenstion which will be changed to slam pads) Link to comment Share on other sites More sharing options...
Sarge Posted December 29, 2013 Share Posted December 29, 2013 For Production? No magwells allowed, for starters. Will these "slam pads" allow the gun to fit in the box? What kind of weight will they bring to the table? You are only allowed 35 oz so you should be fine but I would still be careful Link to comment Share on other sites More sharing options...
deerassassin22 Posted December 29, 2013 Author Share Posted December 29, 2013 Oh no magwell I won't have to worry then about the slam pads. Then I should be good to go will have to take my Magwell off but I should be more then good then. Link to comment Share on other sites More sharing options...
Sarge Posted December 29, 2013 Share Posted December 29, 2013 Sounds just like mine except for the tungsten guide rod. I just melted some lead into my stock guide rod for a little extra weight. Link to comment Share on other sites More sharing options...
frag316 Posted December 30, 2013 Share Posted December 30, 2013 I think I might start shooting production I want a 2nd opinion on my setup here to make sure I'm KOSHER. 1. XDM 5.25 40 Cal 2. Dawson ICE Magwell (USPSA/IDPA) legal one. 3. Tungsten Guide Rod/with 1911 Rcoil Springs 4. Blade Tech DOH Black Ice Holster 5. DAA Mag Pouches 6. Total Weight with Empty Mag is 2lb 1.2oz (33.2oz) That's with my Dawson Plus 2/3 Extenstion which will be changed to slam pads) Appendix D4 states the pistol can be 2 ounces over the listed weight of the pistol on the approved pistol list with an empty magazine inserted. I got this from the approved handgun list: XDm 525 C .40S&W 5.25" barrel (32 oz.). So, theoretically, you can get away with your mods, minus the magwell, IF the gun fits inside the box with your "slam pads." Also, I thought I read somewhere that the Black Ice holster as not Production-legal, due to how the holster was cut WRT the ejection port. I'd measure it to make sure it's legal. Link to comment Share on other sites More sharing options...
Sarge Posted December 30, 2013 Share Posted December 30, 2013 I think I might start shooting production I want a 2nd opinion on my setup here to make sure I'm KOSHER. 1. XDM 5.25 40 Cal 2. Dawson ICE Magwell (USPSA/IDPA) legal one. 3. Tungsten Guide Rod/with 1911 Rcoil Springs 4. Blade Tech DOH Black Ice Holster 5. DAA Mag Pouches 6. Total Weight with Empty Mag is 2lb 1.2oz (33.2oz) That's with my Dawson Plus 2/3 Extenstion which will be changed to slam pads) Appendix D4 states the pistol can be 2 ounces over the listed weight of the pistol on the approved pistol list with an empty magazine inserted. I got this from the approved handgun list: XDm 525 C .40S&W 5.25" barrel (32 oz.). So, theoretically, you can get away with your mods, minus the magwell, IF the gun fits inside the box with your "slam pads." Also, I thought I read somewhere that the Black Ice holster as not Production-legal, due to how the holster was cut WRT the ejection port. I'd measure it to make sure it's legal. Yeah, I misread the list. So the gun is only allowed to be 34 total. Even closer than I thought it was and even more reason to be careful. Remember, scales are like chrono's. Does not matter what your scale says, it matters what a match scale says. Link to comment Share on other sites More sharing options...
9146gt Posted December 30, 2013 Share Posted December 30, 2013 I think I might start shooting production I want a 2nd opinion on my setup here to make sure I'm KOSHER. 1. XDM 5.25 40 Cal 2. Dawson ICE Magwell (USPSA/IDPA) legal one. 3. Tungsten Guide Rod/with 1911 Rcoil Springs 4. Blade Tech DOH Black Ice Holster 5. DAA Mag Pouches 6. Total Weight with Empty Mag is 2lb 1.2oz (33.2oz) That's with my Dawson Plus 2/3 Extenstion which will be changed to slam pads) Appendix D4 states the pistol can be 2 ounces over the listed weight of the pistol on the approved pistol list with an empty magazine inserted. I got this from the approved handgun list: XDm 525 C .40S&W 5.25" barrel (32 oz.). So, theoretically, you can get away with your mods, minus the magwell, IF the gun fits inside the box with your "slam pads." Also, I thought I read somewhere that the Black Ice holster as not Production-legal, due to how the holster was cut WRT the ejection port. I'd measure it to make sure it's legal. Yeah, I misread the list. So the gun is only allowed to be 34 total. Even closer than I thought it was and even more reason to be careful. Remember, scales are like chrono's. Does not matter what your scale says, it matters what a match scale says. Sarge, I agree scales and chronos should be certified or not used. Or why have rules that cannot be enforced? Been in racing to long, with all that sillyness. Tom Link to comment Share on other sites More sharing options...
EkuJustice Posted December 31, 2013 Share Posted December 31, 2013 That's why I don't cut my ss or production gun real close on weight or pf. Link to comment Share on other sites More sharing options...
Idoktr Posted January 6, 2014 Share Posted January 6, 2014 interesting Link to comment Share on other sites More sharing options...
JAFO Posted January 7, 2014 Share Posted January 7, 2014 The Black Ice I have for my X5 is fine WRT the ejection port cut: I did have to shim it out at the bottom to make the 2" distance at the grip, probably because of the weight of the gun. You may not have that problem with an XDm. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now