mwx40x40 Posted November 1, 2013 Share Posted November 1, 2013 While watching 3GNation Timney Trigger's has an ad with Keith Garcia in it. His rifle looks like it has a Limbsaver recoil pad on it. I went to Limbsaver's website and they show they have a slip on pad, however, the one on Garcia's rifle does not look to be a slip on. Does anyone know how the Limbsaver pad is mounted on his rifle? I do not need it for recoil, but was hoping to extend my fixed Ace stock a little bit. Link to comment Share on other sites More sharing options...
Shooter115 Posted November 1, 2013 Share Posted November 1, 2013 Guessing it would be "sand to fit" and epoxied on. Not a big job. Link to comment Share on other sites More sharing options...
J-Rob Posted November 3, 2013 Share Posted November 3, 2013 Ace makes a 1" Recoil pad for the stock. Would that work for you? Link to comment Share on other sites More sharing options...
mwx40x40 Posted November 3, 2013 Author Share Posted November 3, 2013 Ace makes a 1" Recoil pad for the stock. Would that work for you? Thanks, I will check in to it, but 1" might be a tad too much. Link to comment Share on other sites More sharing options...
practical_man Posted November 4, 2013 Share Posted November 4, 2013 40x40 When I first starts shooting skeet a lot I experimented to get proper lengh of pull with my 11-87. I didn't want to spend a bunch of money on an adjustable stock at the time. As you know he Remington stocks are pretty short on the field guns. I used 1/4" spacers cut from nylon Sheeting led over from another project. Plexiglas would probably work too. For the pad I used a standard kick-eez recoil pad from brownells. I used a 1/2" pad on that gun. They com in 1/4" increments and several styles. I am fond of the clays style because it is tapered at the top for a quick mount. I also have one on a hard kicking 9.3x62 rifle. Good pads that last. Easy to fit if you have a palm sander and a little patience. Start with 80 grit paper for shaping. Use 220 for final finish. Hope this helps ya with an alternative approach -John Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted November 4, 2013 Share Posted November 4, 2013 You can message Keith on his Facebook page. https://www.facebook.com/keith.garcia.754?fref=ts Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted November 6, 2013 Share Posted November 6, 2013 Keith actually uses this recoil pad because he has a bad shoulder. Something called shouldervaginitus. Link to comment Share on other sites More sharing options...
Ming the Merciless Posted November 6, 2013 Share Posted November 6, 2013 If you have the Ace recoil pad installed, you can insert a spacer between the Ace recoil pad and the metal butt plate. I've used black delrin (acetal) to substantially lengthen pull, you just need to use longer screws to mount the Ace recoil pad. Link to comment Share on other sites More sharing options...
Steve RA Posted November 6, 2013 Share Posted November 6, 2013 shouldervaginitus. That sounds terrible, most people don't have one on their shoulder !!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now