b18prl Posted October 16, 2013 Share Posted October 16, 2013 FYI Guys, I found something very helpful to us that shoot stock2 but would like to make the thing runs 100% on any primers. Here's a scoop: I had my gun done by a reputable stock2 gunsmith using Eric's pin and hammer my d/a is at 6.5lb and my s/a is at 2.5lb very crisp no complaint there but since the primers shortage have caused us problem I happened to have boat load of tula primers as we all know they're pretty hard. So I used stock hammer spring for practice and 14lb for major matches but it runs on Federal primers only. Then I found out from a source at one of the class I took to use henning' pin because it'll eat anything but not production legal since there's no firing pin block. Make the long story short, I just got off the phone with Henning and was told to wait another month for his new pin to come out. It's gonna be uspsa legal just like Eric's pin but will be ignite more reliably. I already put my order so should you, Pat Link to comment Share on other sites More sharing options...
kneelingatlas Posted October 16, 2013 Share Posted October 16, 2013 Pat, where did you get Eric's Hammer? Link to comment Share on other sites More sharing options...
Torogi Posted October 16, 2013 Share Posted October 16, 2013 I did a trigger job for a buddy using the lightest main spring from wolff cut 2 coils and his ignites Tula primers. Though i did cut some coils from the firing pin spring. Is Eric's hammer production legal already? Link to comment Share on other sites More sharing options...
Yagi Posted October 16, 2013 Share Posted October 16, 2013 I had my gun done by a reputable stock2 gunsmith using Eric's pin and hammer my d/a is at 6.5lb and my s/a is at 2.5lb very crisp Who is the gunsmith you use? Link to comment Share on other sites More sharing options...
b18prl Posted October 16, 2013 Author Share Posted October 16, 2013 John, I got it from Bodkin. I used Eric's hammer at the ipsc National last week, I'm sure it'd bee ok with uspsa. Link to comment Share on other sites More sharing options...
b18prl Posted October 16, 2013 Author Share Posted October 16, 2013 I used Eric's hammer with a new factory one piece sear and sp01 sear spring, very crisp and short reset. Link to comment Share on other sites More sharing options...
b18prl Posted October 16, 2013 Author Share Posted October 16, 2013 btw John< I have another sp01!! lol Link to comment Share on other sites More sharing options...
kneelingatlas Posted October 16, 2013 Share Posted October 16, 2013 btw John< I have another sp01!! lol Me too! I got one at 5% below MSRP with free shipping from Kentucky. Link to comment Share on other sites More sharing options...
Torogi Posted October 16, 2013 Share Posted October 16, 2013 John, I got it from Bodkin. I used Eric's hammer at the ipsc National last week, I'm sure it'd bee ok with uspsa. Thanks. I got one from EG when it came out. Good to know its good to go with IPSC. Link to comment Share on other sites More sharing options...
b18prl Posted October 16, 2013 Author Share Posted October 16, 2013 I found one on Gunbroker 15mins after the guy posted it. Link to comment Share on other sites More sharing options...
b18prl Posted October 16, 2013 Author Share Posted October 16, 2013 John, I got it from Bodkin. I used Eric's hammer at the ipsc National last week, I'm sure it'd bee ok with uspsa. Thanks. I got one from EG when it came out. Good to know its good to go with IPSC. Now I just need to try Henning's pin, hope it works. Link to comment Share on other sites More sharing options...
Magsz Posted October 17, 2013 Share Posted October 17, 2013 So in a month from now or so we should have a production legal extended pin from hennings? I just want to make sure im reading this correctly. Link to comment Share on other sites More sharing options...
b18prl Posted October 17, 2013 Author Share Posted October 17, 2013 yes sir Link to comment Share on other sites More sharing options...
b18prl Posted October 17, 2013 Author Share Posted October 17, 2013 The little bird told me he's been using Henning's firing pin on his practice gun and told me to get one so I called Henning but they're out of stock on the original ones but will come out with an update version for us stock2 within a month or so, I told Arik about it today too. Link to comment Share on other sites More sharing options...
adiksaputok Posted October 17, 2013 Share Posted October 17, 2013 thanks for the info cant wait to shoot my ST2 without light strikes Link to comment Share on other sites More sharing options...
b18prl Posted October 17, 2013 Author Share Posted October 17, 2013 What's your set up if you don"t mind I ask, maybe I can help. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now