alecmc Posted September 5, 2013 Share Posted September 5, 2013 I'm noticing a little front to back wobble / play on the top end of my houge big butts on my 625. is there any home made remedies to tighten her back up? I was thinking of maybe building up the front of the strap with some tape to give it a little more width. thoughts ? ideas? thanks Link to comment Share on other sites More sharing options...
Dogged Posted September 5, 2013 Share Posted September 5, 2013 (edited) I'm noticing a little front to back wobble / play on the top end of my houge big butts on my 625. is there any home made remedies to tighten her back up? I was thinking of maybe building up the front of the strap with some tape to give it a little more width. thoughts ? ideas? thanks Ok I'm from the south, shim it with Duck Tape! Edited September 5, 2013 by Dogged Link to comment Share on other sites More sharing options...
Bubber Posted September 5, 2013 Share Posted September 5, 2013 My Big Butt does not wiggle but it does jiggle when I stop real quick. (puking emoticon here) Shimming it as you and Dogged mentioned may help. Is it a side to side movement or back and forth. sometimes getting a shorter mouting screw helps to hold the grip up tight on the frame Link to comment Share on other sites More sharing options...
Pseudonym Posted September 5, 2013 Share Posted September 5, 2013 This is going to seem silly but since it happened to me I will pass it along. Check to make sure the screw is not too long and bottoming out on the frame before the grip is actually tight. Hogue had sent a screw too long with one of my sets of big butts and it would allow the grips to rock front to back after shooting a few rounds. I finally noticed when changing grips on and off between guns. Link to comment Share on other sites More sharing options...
Ken_Bird Posted September 5, 2013 Share Posted September 5, 2013 It was two long on my 617, Shortened it and my BUTT is now tight. Link to comment Share on other sites More sharing options...
Carmoney Posted September 6, 2013 Share Posted September 6, 2013 Yep, grind a little off the end of the grip mount screw, and it will tighten right down. Link to comment Share on other sites More sharing options...
alecmc Posted September 6, 2013 Author Share Posted September 6, 2013 derp! that did it, thanks guys Link to comment Share on other sites More sharing options...
Pin Shooter Posted September 6, 2013 Share Posted September 6, 2013 Lol..... Kens butt is tight Link to comment Share on other sites More sharing options...
COF Posted September 6, 2013 Share Posted September 6, 2013 I was going to suggest doing some squats to tighten up the butt Link to comment Share on other sites More sharing options...
Lesliet Posted September 9, 2020 Share Posted September 9, 2020 Glad I looked here first... same thing. 625-4, just ground about 2 threads off, and it all fits tight now, just in time for the next match. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now