DougCarden Posted October 23, 2004 Share Posted October 23, 2004 Here I was this week, feverishly trying to load up some brand new, super Mousyfarty steel loads when I notice when checking my powder drops from the measure(Dillon on 1050) when I notice that some were over 2.0gr light. Try 10 in a row, same deal, some right on, some not. I then tore down the Measure and Lo and Behold, a chunk of crapola was wedged in between the plates that run the powder bar. Who knows how long this sucker has been in there. The Measure was new over the winter and this crapola might explain why I had three almost squibs at a match last weekend with loads I loaded in February. I also had a bunch of light charge loads with CLAYS that ended up being squibs as well. Big flakes hitting big chunk of crap equals not much powder. My moral of this story, if you are loading a lot of ammo, you might want to check your powder measure from time to time. I know that a lot of us are anal retentive when it comes to Reloading( but some of us are not! and you know who you are! ) Link to comment Share on other sites More sharing options...
Tri Burst Posted October 23, 2004 Share Posted October 23, 2004 The real question is HOW did the crapola get into the powder to be left in the measure. Link to comment Share on other sites More sharing options...
Guest Larry Cazes Posted October 24, 2004 Share Posted October 24, 2004 Yup, i have had my 550B out in my dirty garage for 2+ years and have NEVER cleaned the measure. I have also NEVER had a problem with it throwing bad charges. Clays does not meter very well from my dillon measure so I don't use it any more. Link to comment Share on other sites More sharing options...
Dream Posted October 25, 2004 Share Posted October 25, 2004 Your suppost to clean them???????????? Link to comment Share on other sites More sharing options...
Tri Burst Posted October 25, 2004 Share Posted October 25, 2004 I've owned my 650 for 4 years and have NEVER cleaned the powder measure. Why the powder is covered and the charge bar is small. I do oil the arms on the side of it every year or so. Link to comment Share on other sites More sharing options...
George Posted October 26, 2004 Share Posted October 26, 2004 I’ve got a Dillon 550 measure that has been dumping charges for over fifteen years with no cleaning. I’ve never even considered cleaning any of my powder measures. -- Regards, Link to comment Share on other sites More sharing options...
wide45 Posted October 26, 2004 Share Posted October 26, 2004 You know the foam plastic seal that must be peeled from the top of a new powder jug? Make sure you get every last piece of it. Do NOT let any fragments get into the powder. You won't find it all until each piece gets caught in your powder measure. Link to comment Share on other sites More sharing options...
blackdragon Posted October 26, 2004 Share Posted October 26, 2004 I'm right along with the rest of you, I have never cleaned a powder measure my 1050 I've had for about 9yrs, 5-6 square deals. Never had any trouble with them! Ivan Link to comment Share on other sites More sharing options...
Duane Thomas Posted October 27, 2004 Share Posted October 27, 2004 Never. Link to comment Share on other sites More sharing options...
shred Posted October 27, 2004 Share Posted October 27, 2004 I clean 'em rarely just to remove some of the graphite from the plastic that makes it hard to see how much powder is left. A dishwashing mop is great for that. Link to comment Share on other sites More sharing options...
Jasonub Posted October 28, 2004 Share Posted October 28, 2004 once in a blue moon. i cranked out over 50000 rounds both 45 and 40 cal and i cleaned it maybe 2x Link to comment Share on other sites More sharing options...
.40AET Posted October 28, 2004 Share Posted October 28, 2004 Not yet. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now