Mat Price Posted April 27, 2012 Share Posted April 27, 2012 (edited) My normal load is 7.4 grains of ac behind a 124 jhp @ 1.165 with wolf srp. Gives me around 175 of I think I am going to drop a 115 jhp and bump it up to 7.6 and see what I get what do y'all think? Edited April 27, 2012 by Mat Price Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted April 27, 2012 Share Posted April 27, 2012 My normal load is 7.4 grains of ac behind a 124 jhp @ 1.165 with wolf srp. Gives me around 175 of I think I am going to drop a 115 jhp and bump it up to 7.6 and see what I get what do y'all think? Mat sounds good, but you'll probably have to bump it up a bit more with a 115 gr bullets - but start low and slow Link to comment Share on other sites More sharing options...
Mat Price Posted April 27, 2012 Author Share Posted April 27, 2012 yeo jack i came in right where I figured I would. 160 PF. so I think I am going to try 7.8 and then 8.0 see where that lands me. Link to comment Share on other sites More sharing options...
buckaroo45 Posted April 27, 2012 Share Posted April 27, 2012 For what it's worth I run 6.8 gr AutoComp w/ 124gr JHP Montana Gold in my G17 Open and get a nice 1375 FPS for a comfortable 170PF and can cover the pattern @ 50' with the palm of my hand. Link to comment Share on other sites More sharing options...
Mat Price Posted April 27, 2012 Author Share Posted April 27, 2012 I run 7.4 grains of ac with a 124 jhp mg at 1.165 and get around 173-175 Link to comment Share on other sites More sharing options...
CocoBolo Posted April 27, 2012 Share Posted April 27, 2012 Check your accuracy at 25 to 50 yards with the 115gr, my gun don't like them. YMMV Link to comment Share on other sites More sharing options...
Mat Price Posted April 27, 2012 Author Share Posted April 27, 2012 The hs6 loads I made up were ok @25 nothing stellar. I am more just playing and experimenting. So far nothing beats my a/c load and the 124 Link to comment Share on other sites More sharing options...
shred Posted May 17, 2012 Share Posted May 17, 2012 9mm or Super? My Supers don't like it for steel loads and 115 MG's Link to comment Share on other sites More sharing options...
Heckler Posted May 17, 2012 Share Posted May 17, 2012 I am using 7.4 grains of AC and a 115 bullet loaded to 1.130 for a PF of 169. That is through a CZ CZeckmate pistol. I am switching to 6.9 grains of AC and 124 bullets, puts me right at 170 pf. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now