brhalolll Posted April 7, 2012 Share Posted April 7, 2012 More accurate with or without a compensator on your rifle? If it helps I am shooting a 264 Winchester magnum that has a threaded compensator. I am curious if anyone has any previous experience. Link to comment Share on other sites More sharing options...
Braxton1 Posted April 7, 2012 Share Posted April 7, 2012 It really depends on the rifle. Adding a compensator should not, in and of itself, affect accuracy at all, assuming that it's installed correctly and has adequate clearance for the bullet to pass through without touching it or coming so close that the air can't compress between the bullet and the comp. Where it can affect accuracy is in barrel harmonics. Any change to the weight of the barrel, particularly at the end, is going to affect the harmonics of that barrel whenever a bullet is passing down it. Could be better....could be worse, but either result will likely not be drastic. Link to comment Share on other sites More sharing options...
RH45 Posted April 7, 2012 Share Posted April 7, 2012 It really depends on the rifle. Adding a compensator should not, in and of itself, affect accuracy at all, assuming that it's installed correctly and has adequate clearance for the bullet to pass through without touching it or coming so close that the air can't compress between the bullet and the comp. Where it can affect accuracy is in barrel harmonics. Any change to the weight of the barrel, particularly at the end, is going to affect the harmonics of that barrel whenever a bullet is passing down it. Could be better....could be worse, but either result will likely not be drastic. Yup! If you handload, you might have to tweak your load for optimum accuracy. Also, on some rifles, removing, or adding a comp changes point of impact. Link to comment Share on other sites More sharing options...
brhalolll Posted April 7, 2012 Author Share Posted April 7, 2012 I am testing some loads in this rifle. I hate to shoot it with the muzzle break, because it is exceptionally loud. I typically wear plugs and muffs. However, I forgot how much it helped with the recoil. Makes a huge difference. Link to comment Share on other sites More sharing options...
MTSCMike Posted April 7, 2012 Share Posted April 7, 2012 If you are testing loads for future use in the rifle then test them with the rifle configured the same way it will be when you use them. Link to comment Share on other sites More sharing options...
brhalolll Posted April 7, 2012 Author Share Posted April 7, 2012 Good point. Link to comment Share on other sites More sharing options...
RH45 Posted April 9, 2012 Share Posted April 9, 2012 I am testing some loads in this rifle. I hate to shoot it with the muzzle break, because it is exceptionally loud. I typically wear plugs and muffs. However, I forgot how much it helped with the recoil. Makes a huge difference. A properly made compensator should direct the blast, and noise around the shooter. I have one on a .22-250 that is noisy to the shooter. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now