EkuJustice Posted January 28, 2012 Share Posted January 28, 2012 Does your STI grip tape fit the STI aluminum grips, if so which of the grips Link to comment Share on other sites More sharing options...
AWLAZS Posted January 28, 2012 Share Posted January 28, 2012 I use the STI grip tape on my aluminum grip it fits fine. (regular size grip) Link to comment Share on other sites More sharing options...
Aircooled6racer Posted January 29, 2012 Share Posted January 29, 2012 Hello: The grip tape is too large for the small aluminum grip. Just to let you know. Thanks, Eric Link to comment Share on other sites More sharing options...
Jonathan Taliani Posted October 18, 2012 Share Posted October 18, 2012 Hello: The grip tape is too large for the small aluminum grip. Just to let you know. Thanks, Eric Old thread that I wish I would have discovered previously as the Dawson Tech wasn't sure, so I chanced it. Were you able to find grip tape that worked Eric? I was able to use older gorilla grip tape with very slight modification, but it didn't have the screw holes cut out. In a butchered attempt to cut the holes, I ended up having to cut unsightly square holes in the tape. Link to comment Share on other sites More sharing options...
mildot1 Posted October 19, 2012 Share Posted October 19, 2012 308 casing makes a very nice hole punch for the grip screws! I use 3M tread pads to make my grip tape from. Mildot Link to comment Share on other sites More sharing options...
dawsonprecision Posted October 19, 2012 Share Posted October 19, 2012 The next aluminium grip we get is going to be used to design grip tape before it gets shipped. Link to comment Share on other sites More sharing options...
Jonathan Taliani Posted October 19, 2012 Share Posted October 19, 2012 The next aluminium grip we get is going to be used to design grip tape before it gets shipped. Fantastic! Thanks for always taking care of us! Link to comment Share on other sites More sharing options...
Jonathan Taliani Posted October 20, 2012 Share Posted October 20, 2012 The next aluminium grip we get is going to be used to design grip tape before it gets shipped. Since this will be for the aluminum grip will it have the top screw holes only? (Please say yes ) Link to comment Share on other sites More sharing options...
Jonathan Taliani Posted October 31, 2012 Share Posted October 31, 2012 Is there by chance an ETA for when the Grip Tape for the Aluminum Grip will be available? Link to comment Share on other sites More sharing options...
rack&roll Posted January 9, 2013 Share Posted January 9, 2013 I too, need the grip tape for the standard STI aluminum grip. I was able to make your current grip tape work, but it is slightly larger than the frame. It is a little bumpy on the front corners, if you place it so the top grip screws fit. I also had to shorten it to fit the magwell. Not bad, but I am really looking forward to some grip tape that fits! Please! Thanks. Link to comment Share on other sites More sharing options...
dawsonprecision Posted January 11, 2013 Share Posted January 11, 2013 Is there by chance an ETA for when the Grip Tape for the Aluminum Grip will be available? It is done. Look for it on DP website tomorrow part # starts at 036-920. I did a good job.Thanks, Dave Dawson Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now