Patrick1981 Posted January 10, 2012 Share Posted January 10, 2012 Hello ! I would one replacement hammer sear for my 686, but on Midway it exists only one sear (everytime). I do not see wrote 686. For you it's all right? A friend told me that it's okay Thanks Link to comment Share on other sites More sharing options...
Bubber Posted January 10, 2012 Share Posted January 10, 2012 Patrick, hopefully someone who knows more than I will answer, But... all the sears I have looked at in my collection of parts seem to be the same. I know all triggers will fit each frame and it would seem that the sears are interchangeable also. Maybe Toolguy can enlighten us more. Oh and I HATE MIM, just old school. later rdd Link to comment Share on other sites More sharing options...
Patrick1981 Posted January 10, 2012 Author Share Posted January 10, 2012 Thank you Link to comment Share on other sites More sharing options...
Tom E Posted January 11, 2012 Share Posted January 11, 2012 This is one of those "it depends" things. The sear you show in your post is for the MIM hammer of a FMFP gun. The hammer mounted firing pin guns have a different, pinned, sear. Link to comment Share on other sites More sharing options...
Patrick1981 Posted January 11, 2012 Author Share Posted January 11, 2012 Yes, I have a MIM hammer Link to comment Share on other sites More sharing options...
Toolguy Posted January 11, 2012 Share Posted January 11, 2012 Hi Patrick- Although I don't know for sure, I strongly suspect they all use the same sear. At the time they were doing this (MIM) they standardized other things such as all the same rear sight assy., all drilled with scope mount holes, all with round butt grip frame, etc. Link to comment Share on other sites More sharing options...
Patrick1981 Posted January 12, 2012 Author Share Posted January 12, 2012 When I have it, can I lightly polish the trigger contact surface ? Link to comment Share on other sites More sharing options...
Toolguy Posted January 12, 2012 Share Posted January 12, 2012 Yes - that will be fine. Link to comment Share on other sites More sharing options...
stardust tommy Posted January 19, 2012 Share Posted January 19, 2012 in the following link you can order the Jerry kuhnhausen shopmanual for S&W revolvers, in Europe (belgium) http://www.arms-books.be/belgium/en/detail.asp?id=282 a must have gr Tom Link to comment Share on other sites More sharing options...
Patrick1981 Posted January 20, 2012 Author Share Posted January 20, 2012 thanks ! Link to comment Share on other sites More sharing options...
pyrrhic3gun Posted January 24, 2012 Share Posted January 24, 2012 I guess Bubber understands the first post because it's close to Okie-speak. :^) Pat, just get out the dremel and make one. You even have a picture of it. Link to comment Share on other sites More sharing options...
Patrick1981 Posted January 24, 2012 Author Share Posted January 24, 2012 (edited) That's ok, yesterday i receive the new SEAR from Midway and installed. And test it from the range, OK shoot good ! Edited January 24, 2012 by Patrick1981 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now