DULLYJAY Posted March 1, 2004 Share Posted March 1, 2004 Just got 500 these bullets. I have some IMR Hi-Skor 700x powder in the deal.Whats your load for the both? TIA Link to comment Share on other sites More sharing options...
Philip Dedmon Posted March 1, 2004 Share Posted March 1, 2004 Don't have a load for the 700x but, if it is 45 acp 200 SWC's you are talking about I have had really good results with these loads out of a couple of my 5" 45's. They are not major, just something to shoot. 4.4 grs. Tite-Group 1.235 oal 4.1 grs. Bullseye 1.235 oal 5.1 grs. 231 1.235 oal 4.5 grs N320 1.235 oal Link to comment Share on other sites More sharing options...
DogmaDog Posted March 8, 2004 Share Posted March 8, 2004 I'll add that 4.6gr of WST under a 200gr LSWC loaded to 1.260" OAL (.45acp) makes right around 170 pf. Link to comment Share on other sites More sharing options...
Run n Gun Posted March 9, 2004 Share Posted March 9, 2004 My "major" load for a 200 LSWC is 4.7 Titegroup @ 1.250, about 168-170 pf. Ed Link to comment Share on other sites More sharing options...
Larry White Posted March 9, 2004 Share Posted March 9, 2004 Lyman says aol 1.161---4.0 gives 745, max---5.2 gives 940. Link to comment Share on other sites More sharing options...
TBF Posted March 10, 2004 Share Posted March 10, 2004 5.0 gr. Bullseye is a really nice load under a 200 gr. bullet. Travis F. Link to comment Share on other sites More sharing options...
richard franklin Posted March 17, 2004 Share Posted March 17, 2004 3.8 vv n 310 -200gr swc. Link to comment Share on other sites More sharing options...
Sac Law Man Posted March 17, 2004 Share Posted March 17, 2004 4.4 grains of 700X should give you approx 823 FPS, 5.4 grains of 700X will give you approx 968 FPS with a 200 Grain SWC out of a 5 inch barrel. Link to comment Share on other sites More sharing options...
Harmon Posted June 7, 2004 Share Posted June 7, 2004 IMR 700 x may be a great powder, but having experience with other imr shotgun powders in pistols from 9mm 40, 10mm 38 super and the ole 45 leads me to believe the amount IMR allows thier powders to vary leads to load being hottter or not nearly warm enough. work up a load with 4.4 grains in one can, shoot that can, then go buy another and your favorite 4.4 load is underpowdered and dirty. 4,4 of clays is an excellent load. as is 4.6 of WST. the all time fav of mine is 5 grains of bullseye and just about any 200 grain pill. nice ez shooting load. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now