assaulter Posted October 15, 2010 Share Posted October 15, 2010 I've never gave a lot of concern to what velocity I was getting other than an indicator of pressure. I was using xm 193 for 3gun matches this year, but I think for next year I'll do my own. My accurate load with 55's are getting 2900 which is pretty slow compared to the 3200 fps I was getting with factory ammo. That's about another 13" drop at 500 yards. I'm going to stick with 55's for now to keep it simple. I have loads for 69's and 75's but it's a pain keeping three different zeros. So what are you getting from your 55's? Link to comment Share on other sites More sharing options...
Tyro Shooter Posted October 16, 2010 Share Posted October 16, 2010 XM-193 18" mini SASS Bbl w/ JP comp 1:8 Twist 3150 FPS Average Link to comment Share on other sites More sharing options...
Religious Shooter Posted October 16, 2010 Share Posted October 16, 2010 I thought you chronoed at 3050 at the Nationals? Link to comment Share on other sites More sharing options...
GuyC Posted October 16, 2010 Share Posted October 16, 2010 3100 Link to comment Share on other sites More sharing options...
Tyro Shooter Posted October 16, 2010 Share Posted October 16, 2010 yes i did . . . but when I've chronoed at Piru & Pala in the month leading up to the Nationals i was a consistent 3150 to 3125. I've clocked them as high as 3200 even here indoors with corrected lighting i'm getting over 3100. . . . after looking at my scores I'm convinced my guns don't like Vegas Link to comment Share on other sites More sharing options...
el pres Posted October 16, 2010 Share Posted October 16, 2010 (edited) 3100, matches my 69gr @ 2850 and 75gr @ 2770 loads quite well. Can shoot either with the same hold overs that way. Edited October 16, 2010 by el pres Link to comment Share on other sites More sharing options...
Kevin Holman Posted October 17, 2010 Share Posted October 17, 2010 3100, which is factory 55gr. All I pretty much shoot is my handloaded 75's tho, which are ~2700. I only shoot the cheap 55's on the close hoser stages, or if no targets are over 100 yds. I plan on switching to 69's once I use up all my 75's... and use that acorss the course for matches, which I plan around 2800, last time I loaded some. Link to comment Share on other sites More sharing options...
M ammo Posted October 17, 2010 Share Posted October 17, 2010 55's running 2819 to match the drops in my scope. and Burris XTR,, in 7.62 the drops work out well,, out to 600. I can get good hits. Oh but past 200 I shoot 69's over the same powder load, A2230 24.1 Gr and the dropps work for them too. 16 inch barrel.. Tyro!!!!!! HA too funny ""I'm convinced my guns don't like Vegas""" I thought it is that guns are afraid of the Buzzer on the,, timer, seeing they only seem to Puke, during competitions. Jim M ammo Link to comment Share on other sites More sharing options...
3gunner Posted October 17, 2010 Share Posted October 17, 2010 With a 55 gr V Max and h335 in once fired cases I'll get 3050-3100. Thats on the "hot" side. My blasting load is @2900 in mixed brass. I would hate to have a primer come out during a match. I use a lot of silver bear for the close hoser stuff. fwiw Link to comment Share on other sites More sharing options...
jaredr Posted October 18, 2010 Share Posted October 18, 2010 now getting an average of 2950 with 55gr hdy fmj out of 16" S&W carbine (1/7 twist, chrome lined). it's a bit on the slow side compared to xm193 (at least when that crap isn't blowing primers into the trigger group) but I shoot mostly inside of 100 yds and load mixed headstamp so I'm happy to keep powder charges sedate. difference between 2950 and 3100 is (for me) not meaningful, although i'm also shooting more and more 22lr in a conversion for practice up close. -jared Link to comment Share on other sites More sharing options...
PacMan Posted October 19, 2010 Share Posted October 19, 2010 XM193 is actually 5.56 load and it is pretty hot, chrono'ed at better than 3200 fps out of my 20" JP. My match load is 55 gr of Blitz King over 25.4 gr of H335 and no crimp is getting 3050 fps. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now