slavic09 Posted November 14, 2010 Share Posted November 14, 2010 MGM says the one for the Millett will fit Alex Travis sent me one of these. I modified it a bit to allow for the raised notch on the adjustment dial. Works great, and no extra long screws needed. Link to comment Share on other sites More sharing options...
Alaskapopo Posted November 14, 2010 Share Posted November 14, 2010 I shoot 69gr SMKs at 2800 fps. My drops are: 175 zero (orange dot) 300 first drop (first cross bar) 400 second drop (first black dot) 480 third drop (second cross bar) 525 fourth drop (second black dot) Altitude has a big effect of course. But they are .75 mil drops. Turrets are 1.5 cm clicks. Swarovski's online calc is very accurate: http://ballisticprograms.swarovskioptik.com/BRT_us.html What did you input for sight height over bore? 2.5 inches Pat Link to comment Share on other sites More sharing options...
Cap Posted November 16, 2010 Share Posted November 16, 2010 Just got my z6i BRT. It came with a throw lever from Swarovski. It the installation instructions it specifically mentioned it was for 3-gun use. For those looking for a lever, I'm sure it could be purchased seperately. Link to comment Share on other sites More sharing options...
1chota Posted November 16, 2010 Share Posted November 16, 2010 Just got my z6i BRT. It came with a throw lever from Swarovski. It the installation instructions it specifically mentioned it was for 3-gun use. For those looking for a lever, I'm sure it could be purchased seperately. i was wondering where you bought yours? i just got mine in last week and it did not come with a cat tail. let me know where you got yours and i will give them a call. thanx, Link to comment Share on other sites More sharing options...
c-rum Posted November 16, 2010 Share Posted November 16, 2010 If you just got your Z6I BRT then call Swaro customer service and they will probably send you one free. That was my luck. Link to comment Share on other sites More sharing options...
1chota Posted November 16, 2010 Share Posted November 16, 2010 If you just got your Z6I BRT then call Swaro customer service and they will probably send you one free. That was my luck. a thousand thank yous. i gave them a call and it is on the way. really nice young former paratrooper working the desk. Link to comment Share on other sites More sharing options...
c-rum Posted November 16, 2010 Share Posted November 16, 2010 If you just got your Z6I BRT then call Swaro customer service and they will probably send you one free. That was my luck. a thousand thank yous. i gave them a call and it is on the way. really nice young former paratrooper working the desk. You are quite welcome. Link to comment Share on other sites More sharing options...
Cap Posted November 18, 2010 Share Posted November 18, 2010 kinda late but mine came from Optics Planet Link to comment Share on other sites More sharing options...
Wakal Posted November 18, 2010 Share Posted November 18, 2010 The "throw levers" are $105. They are packed in with the new BRT line, but the sales guy did say they upped the price a bit to cover the toy Alex Link to comment Share on other sites More sharing options...
grywlfbg Posted November 22, 2010 Share Posted November 22, 2010 I ordered the Millett version of the MGM and with longer screws will work fine. The longer screws are labelled: #4-40x3/4" Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted November 22, 2010 Share Posted November 22, 2010 I got the MGM headed my way too. Link to comment Share on other sites More sharing options...
Cap Posted November 22, 2010 Share Posted November 22, 2010 (edited) here a pic of the throw lever that came with my z6i BRT just in case anyones curious. i don't believe I would knowingly pay $105 for it, but it seems nice. BTW anyone know which butler creek caps fit this thing. The bikini covers have to go. Edited November 22, 2010 by Cap Link to comment Share on other sites More sharing options...
DMAC Posted November 25, 2010 Share Posted November 25, 2010 I had a weak moment and made an impulse buy. My Z6i with BRT is on the way and I should have it in time for FB3G next week. Anyone have theirs mounted on a 308? Link to comment Share on other sites More sharing options...
pdice Posted May 8, 2011 Share Posted May 8, 2011 When anyone has used the ballistic calculator, was there an input specifically for the 1-6? It looks like it might be gone. Link to comment Share on other sites More sharing options...
Alaskapopo Posted May 8, 2011 Share Posted May 8, 2011 When anyone has used the ballistic calculator, was there an input specifically for the 1-6? It looks like it might be gone. http://ballisticprograms.swarovskioptik.com/prev/ its right here Link to comment Share on other sites More sharing options...
pdice Posted May 8, 2011 Share Posted May 8, 2011 When anyone has used the ballistic calculator, was there an input specifically for the 1-6? It looks like it might be gone. http://ballisticprograms.swarovskioptik.com/prev/ its right here Thanks! Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted May 10, 2011 Share Posted May 10, 2011 I just created my own version of the BRT in power point so that I coudl add a little more info and make some to fit on my gun or wherever. I have attached a .pdf so you can see it. If you want the power point file send me a PM. BRT Reticle.pdf Link to comment Share on other sites More sharing options...
02Fatboy Posted May 11, 2011 Share Posted May 11, 2011 I just created my own version of the BRT in power point so that I coudl add a little more info and make some to fit on my gun or wherever. I have attached a .pdf so you can see it. If you want the power point file send me a PM. Jesse which mount are you using? Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted May 11, 2011 Share Posted May 11, 2011 I just created my own version of the BRT in power point so that I coudl add a little more info and make some to fit on my gun or wherever. I have attached a .pdf so you can see it. If you want the power point file send me a PM. Jesse which mount are you using? LaRue SPR-E LT-139. The eye relief is very forgiving. If you don't shoot nose to charging handle the standard LT104 will work fine. Link to comment Share on other sites More sharing options...
02Fatboy Posted May 12, 2011 Share Posted May 12, 2011 I just created my own version of the BRT in power point so that I coudl add a little more info and make some to fit on my gun or wherever. I have attached a .pdf so you can see it. If you want the power point file send me a PM. Jesse which mount are you using? LaRue SPR-E LT-139. The eye relief is very forgiving. If you don't shoot nose to charging handle the standard LT104 will work fine. Thanks. The scope is on it's way to me now. So I will order the mount tonight. Link to comment Share on other sites More sharing options...
Xfactor Posted January 9, 2012 Share Posted January 9, 2012 I just created my own version of the BRT in power point so that I coudl add a little more info and make some to fit on my gun or wherever. I have attached a .pdf so you can see it. If you want the power point file send me a PM. All you guys that use ~100 yard zeros.to get the first hold-over on at about ~300 yards... what is your hold reference for 200 yards? Link to comment Share on other sites More sharing options...
KalaniLaker Posted January 9, 2012 Share Posted January 9, 2012 The drop at 200 yards is about 2". I just hold a little higher on the target. I use the dot for 10 yards to 225 yards. Kalani Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted January 9, 2012 Share Posted January 9, 2012 (edited) I zero the first hash down from the center cross hair at 300. I am then about 1.5" high at 100 with the cross hairs. Very close to that at 200 as well. I am much more concerned with being dead nutz on at the harder 300 yard shot than a 100 or 200 yard shot. I like holding dead center on the target with that 300 yard hash rather than having to favor the top or bottom of the target. It's much easier to hold an inch high on a 100 yard target than a 300 yard target. Edited January 9, 2012 by Jesse Tischauser Link to comment Share on other sites More sharing options...
Powerslide91 Posted January 9, 2012 Share Posted January 9, 2012 Sorry if I am being too dense, but where are you guys seeing the ballistics calculator for the BRT reticule on the Swarovski website? I see options for BRX, BR-I, TDS... Also, somewhere on that page it had links so you could download the program to have local, but the links were broken. Anyone have that program? Thanks. Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted January 9, 2012 Share Posted January 9, 2012 Sorry if I am being too dense, but where are you guys seeing the ballistics calculator for the BRT reticule on the Swarovski website? I see options for BRX, BR-I, TDS... Also, somewhere on that page it had links so you could download the program to have local, but the links were broken. Anyone have that program? Thanks. I use the iPhone App. But I actually use the Ballistic FTE IPhone app the most. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now