ben b. Posted April 23, 2010 Share Posted April 23, 2010 I have the BT dual pouch. It does not seem to hold the COMP-IIIs adequately, and they are prone to popping out if bumped, while bending over, etc. I do have to turn & schwiggle the loaders into place, to get them to seat the deepest into the pouches, but the BT pouches just don't seem to have any sort of "snap" into place or snug-enough retention. I have messed with the screws for retention, but that doesn't seem to improve retention as they will then simply pop out more forcefully. I'm wondering if I have a unique problem or if others are having similar experience with these pouches? Link to comment Share on other sites More sharing options...
hopalong Posted April 23, 2010 Share Posted April 23, 2010 get your hair dryer out, heat it just a little and make them "grip" the comp IIIs better. HOP Link to comment Share on other sites More sharing options...
Blueridge Posted April 24, 2010 Share Posted April 24, 2010 (edited) I have not had any trouble with my BT dual or single speedloader pouches. I would guess that the speedloaders that you are using just don't have enough "friction" with the pouch to keep them in. As Hopalong advised you may just have to adjust them with a hairdryer or heatgun (carefull with a heatgun) to the surface provides more "grip". Edited April 24, 2010 by Blueridge Link to comment Share on other sites More sharing options...
Glshooter Posted April 24, 2010 Share Posted April 24, 2010 You are not alone. Mine were horrible. After owning many Blade-tech holsters, I couldn't believe the poor quality of their speedloader holders. Link to comment Share on other sites More sharing options...
GlockCanMan Posted April 25, 2010 Share Posted April 25, 2010 You are not alone. Mine were horrible. After owning many Blade-tech holsters, I couldn't believe the poor quality of their speedloader holders. I have also stopped using the blade-tech speed loader holster. There are others out there that are better. Link to comment Share on other sites More sharing options...
Canuck223 Posted April 24, 2012 Share Posted April 24, 2012 I've ordered one to test drive. I'm shooting a S&W 58 in .41 Mag, so finding open top pouches for the HKS speedloaders isn't easy. Link to comment Share on other sites More sharing options...
jhgtyre Posted April 25, 2012 Share Posted April 25, 2012 I sent mine back. I hope to find a decent replacement but still haven't quite found what I am looking for. I may just start bending kydex up till I get what I want. That is what I did for a moonclip carrier and I have been very pleased wih the results. -ld Link to comment Share on other sites More sharing options...
M1911 Posted April 27, 2012 Share Posted April 27, 2012 I like the Ready Tactical speedloader pouches. CPWSA sells them and their shipping is really fast. Link to comment Share on other sites More sharing options...
ben b. Posted April 27, 2012 Author Share Posted April 27, 2012 I like the Ready Tactical speedloader pouches. CPWSA sells them and their shipping is really fast. I agree. Ready Tactical are much, much better than the BladeTech models I have. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now