DodgeNerd

I really like the ramp on the taccom, wish they made a 10.5 barrel, mind me asking what you use?

I have the 5"-16 ulw barrel, it's super accurate as well, just itching for a change .

Has anyone been able to compare the 2 setups? 10" barrel w/ Brekke 6″ CompXtension Vs. Taccom Super Feed 10/16 Barrel TIA!

I have more confidence in coated bullet manufacturers than everyone else right now unfortunately. Rumor mil DG is shipping quick, I've had good experience with S&S shipping fast when stuff is in stock.

Sorry, Da/sa straight

Who has one installed? Thoughts ? TIA

Have you shot anything else out of the PCC (factory ammo), or plunk test factory stuff? This short length is ok according to the books with a JHP, but doesn't seem necessary with a coated bullet. I'm not familiar with you barrel but I would imagine 1.11-1.16" could be the norm. What bullet are you using ? Diameter? Do you have a picture of the failed rd?

You'll run into a bunch of issues like feeding and extracting. If the bolt/slide can't get the bullet to chamber properly you wouldn't/shouldn't be able to get the hammer to hit the firing pin. Is this 9mm? 1.07 is pretty short, what barrel?

What gun are you using ? I've used same 147 load before (actually 2.9~3.0gn titegroup) with a shadow 2, I had no problems knocking steel/moving trees. Moved to 3.2gn Sport Pistol w/147s

Have you tried recording the gun (specifically the gun) while shooting to see how it acts with the different ammo? Next, run the timer, see which springs gets you the better splits ???

Is the sleep option new? I've had green circuit boards prior, inner sticker went bad, and got blue board when leupold sent dots back to me. Noticed with blue boards, dot slept during match and had to physically hit the dot to wake up, drawing the gun wouldn't wake it back up. Green boards never slept.

My PCC doesn't like the cones, no feeding issues with RN. BA barrel

Yong Lee does it.

We've put a piece of thin plastic around the metal star under the battery to help the tape hold it in place, works so far to keep it in place, difficult to press the on/off button thou.

I've tried it in Tim Herrons class, it works

Nice

Please let me know what measurement you get

Sweet, I've heard to go get some fishing lead sinkers and melt it down

Who has slug their Shadow 2 barrel? I got .357", sound about right ? I used a 13 Brinnel hi-tek coated projectile, dont have a pure lead projectile to use yet*

Never would have thought to do that!

Thanks everyone, I'll report back in a bit

Best die/dies for coated .356?

so much to learn!

Thanks guys, I have an old rcbs and lee taper die I can try I think

Coated, FP* https://shop.blackbulletsinternational.com/9-147gr-500-9-147-500QTY.htm I will try to pull a bullet or too to see if it's getting sized down, using a Lee FCD btw. I didnt think sport pistol was hot. Maybe I'll bring it up too 3.2 and see what happens.