Fo0
-
Posts
510 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Fo0
-
-
MBX says their buffer can work with 9mm 40s&w and 45acp - can also get 3 different internal springs
-
i changed the yellow buffer spring to the JP rifles 308 Tuned and Polished Buffer Spring, 308 Carbine - much smother
-
has anyone tried to put the rifle length spacer in a carbine buffer tube to short stroke
-
has anyone tried the [NERD] NC NANO 9mm Brake - it has one up port. 1/2×28 and 1/2×36. weight is 1.84 ounces
-
my CZ hammer disco hole is definitely smaller than my Tanfoglio Unica hammer but the BOLO in the CZ hammer - the pin slides in and out - no hammer - just push in and push out. The BOLO in the Unica the pin moves around a little.
-
I use MBX buffer with blue spring and JP rifles 308 Tuned and Polished Buffer Spring, 308 Carbine
-
I use Wolff 18lb mainspring and Wolff Variable Power Recoil Spring 12lb for 40s&w
-
are fliers a problem with 115gr or any problems is there a shorter bearing surface
-
On 1/10/2019 at 9:09 PM, Bmeehan19 said:
Its here!
That is the Brass Top one?
-
I had CGW put my hammer strut in the hammer as I had trouble with the pin also
-
29 minutes ago, matir said:
I'm trying to install the pro kit and no amount of pounding will get the hammer pin through the hammer. I currently have both of them stuck (I don't know what possessed me to try both) in one side of the hammer. Any advice on getting them in? I don't have a vice to try pressing them in...
cgw recommends their starter punch $7.00
-
4 minutes ago, HoMiE said:
Don’t buy a lpk, all you need is pivot and takedown pin if you go with qc10.
and the safety/grip pin and spring
-
2 hours ago, DannyBoyy said:
Would you vote a for:
a new frontier 290
https://www.newfrontierarmory.com/shop/complete-c-5-lower-b5-milspec-stock/
or a fox trot mike 299
https://www.newfrontierarmory.com/shop/complete-c-5-lower-b5-milspec-stock/
or is there a solid other choice that offers LRBHO?
or this complete rifle?
your first two links are the same - also they are for mp5 magazines and no mp5 mag offer LRBHO
-
I would try angst arms @ $224 for stripped lower
-
I got a QC10 lower that looks blue. This wasn't purchased as 'blemished'. I bought this as upper lower set
-
no fitting required for the bolo into the cgw hammer. fit perfectly. I haven't put it in the gun to fit it to the trigger bar yet.
-
On 11/10/2018 at 6:33 PM, kneelingatlas said:
The pin holes in Tanfoglio hammers are larger than in a CZ, so if you wanted to use a BOLO in a CZ you would have to drill out the holes in your hammer and use Tanfoglio pins.
Why not use a CGW disco for a CZ?
-
What color are the islercustom carbon fiber handguards - on their website some of them look bronze/brown
also, it doesn't list any weights
-
-
2011 has more support but for what I am trying to build parts are out of stock or on pre-order. with what doesn't come with EAA Gold Team there are aftermarket support and I am close to Patriot Defense
-
Either will be 38 super comp
Either with cmore slide ride
2011 I was wanting to try the KKM 5" hybrid threaded barrel
EAA Gold Team I was wanting to use the minor pf barrel and drill out the second port on the comp and the four pre-drilled holes in the comp and no barrel ports
I have a 2011 open gun in 9mm but I want to try a 38 sc gun - Never shot a Tanfoglio.
Not worried about the backup gun complications at this point
Thanks
-
what slides are yall using
-
On 12/16/2018 at 7:48 PM, Fo0 said:
The battery would die less than 24 hours
"draining batteries when powered off"
had a replacement in exactly one month with Christmas and New Years in between.
If anyone has no use of their romeo3 low Picatinny mount I would be interested in it to put it on my Vepr 12 - PM me or respond here if willing. Thanks
-
evil hand makes one knock-off of go gun usa
which comp for 9mm PCC ?
in Pistol Caliber Carbine
Posted
how much comp is needed for a 16" 9mm