Blue Jacket

It's too cold to Crono, at least for me. I have some n320 I want to try in some 124gr Bayou TCG. What's a load that should make minor? I tried a search, some seem to recommend using as little as 3.6 up to 4.1. That's a pretty wide spread. This is just to see how I like it at my indoor range. If I like them crono them before using them in a match this Spring. Currently I use 147 Bayous and TG. Thanks

They can mill an standard SP-01, I have a multi cut on mine. Milling did cut into the FPB channel. However, the dot keeps it in. Haven't had any issues with the FP spring or plunger coming out.

Leam, not sure if he is accepting them yet. I don't recall seeing anything since this note.

Nate, I got this e-mail from Gray back in November. I still have one to exchange and put in my upgraded compact once they become available. How's that 320 treating you? Earlier, you received a communication from us relating to your P320 and the straight or curved version of our Practical Enhanced Leverage Trigger (PELT) you purchased from us for your P320. SIG SAUER® has since opened and started performing their voluntary upgrade program to address concerns that were raised over the summer. Grayguns reiterates its recommendation that you remove your PELT from your P320 and retain it. Return your P320 to SIG SAUER - with the original trigger if available - for the voluntary upgrade.Grayguns will be making available an updated version of the PELT that is fully compatible with firearms that have completed the voluntary upgrade program. You will be able to trade your existing PELT for the new version, at no cost to you, to be used in your upgraded P320. We will be sharing details of this exchange program with you soon.Alternatively, PELT owners may choose to have Grayguns perform our new Self Defense or Competition Enhancement Package on their P320s, at a special introductory price that will be announced in the next few weeks. These packages replace all in-shop P320 services previously offered by Grayguns.As part of both packages, Grayguns will facilitate your P320 through the SIG SAUER voluntary upgrade program on an expedited basis, then provide an updated version of the PELT and the finely executed hand tuning we’re famous for. You will not be required to return your P320 to SIG SAUER for the voluntary upgrade before or after one of these packages is performed.Remember, consequences for the handling or misuse of any firearm are the operator’s sole responsibility. Safe gun handling practices should be practiced at all times. Never rely upon any mechanical device for your safety.Thank you for your continued patience as we work to launch the updated PELT and our new Self Defense and Competition Enhancement Packages. If you have any questions, you can contact Grayguns via email.

My other CZs would take about 1.25, but for some reason this barrel likes them a little shorter.

Thanks AZShooter

I use a standard SP-01 with a CGW trigger kit. Works great

Shot 50 tonight loaded a little shorter about 1.10 No issues I'll try again next week to see if I have any problems

Getting ready to add a Burris FF3 to my Mk IV. Going to go the dovetail route and remove the rear sight. Any secrets to removing it? Does it have any set screws or just knock it out of the dovetail? Does it need to go one way or the other? Thanks

Thanks. I’m going to load 50 shorter and try them Wednesday

I just look at the head stamps when loading. Drop the junk right in a bucket for scrap. Makes it less painful

Bowen. Thanks for the offer. I’m trying a few things and will take it back to the range this week. Cheby my oal is 1.12 with Bayou 147s. They seem to plunk ok.

Btw thanks dragon for the link

Niro. Thanks. I do use the Lee factory crimp die. I use that die for all my autoloaders. They are great. Cheby Ill verify OAL tomorrow, but the fact that the exact same round chambered in my PCR leads me to believe it’s not that issue. Those same reloads chamber fine in my PCR, accushadow and the extra non dot milled slide I have for the SP-01. I also didn’t see any rifling marks on it once I got it out.

Thanks Stick. That’s what I figured. However I wanted to confirm it wasn’t just me.

Niro I already use a Lee crimp die. I have rcbs sizing die. Those loads chamber in every other 9mm I have so I don’t think it’s the load. Nathan. I’ll look up patriot. Thanks.

I was loading some 223 on my 550 and have issues with H335 and spillage. Tried two different powder measures and have the same problem. Seems to meter ok, but it comes out from somewhere. No issues with Tightgroup or Longshot on the same measures. I know H335 is much finer. Any thoughts??

I have an extra 9mm SP-01CZ slide that I milled for an optic which has a really tight chamber. Rounds go slow into battery, sometimes i have to tap the back of the slide and I had one round even get stuck tonight. I was able to get it out, loaded the exact same round into my PCR and it chambered and fired without issue. So I am looking for somewhere to send it. Any suggestions??

I don't think barrel length would make a difference on Strelock from what I can tell. You would need to know the velocity though, which barrel length would effect. Do you have a crono?? I have the same question regarding measuring scope height.

Thanks. For the response

I can't seem find the specs on the CZ multi-cut now. I am considering getting a DPP for my carry optics pistol. I think the DPP will fit the CZ multi-cut, but I am not 100% sure. Can someone confirm? Stuart?

John, sent you an IM

Been there done not. Now I only put them on the belt if they are fully loaded. Pockets for pick up

I would have ordered the lower as well if they were in stock.

Thanks for the notice. I wasn't even going to get a PCC, but at that price I couldn't resist.