Quack
-
Posts
954 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Quack
-
-
No prob. I just have a bunch of Glock stuff from years ago.
Sent from my Nexus 7 using Tapatalk
-
I think I have a few std slide stops if you want to trade.
Sent from my Nexus 7 using Tapatalk
-
-
$55 is what the pre-b disconnector costs.
http://czcustom.com/CZUBPREBDROPINDISCONNECTOR.aspx
The 2014 also has the extended FP and spring.
Sent from my Nexus 7 using Tapatalk
-
Are you sure about that? The appear to come in as a SP01 Shadow, then get worked over.The accu basically gets you a tighter interface between barrel and bushing with Accu-bushing, as well as tighter fit between upper and lower as they are both milled to match each other very well.
Sent from my Nexus 7 using Tapatalk
-
Accu is supposed to be more accurate.
Have read of some issues with the HAJO pin coming out. If I don't switch the sight out, I'll order small parts to have on hand.
Sent from my Nexus 7 using Tapatalk
-
http://oakhillguns.com/cz-75-sp01-shadow-custom-2014-9mm-srts-91030.html
I don't have one, I have an Accu Shadow, but a friend just ordered on last night. Pretty much the same minus the bushing and rear HAJO sight
The max OAL I can load MG 124g JHP is 1.095"
I just got my AS a few weeks ago and no issues in the almost 1000rds through it.
Sent from my Nexus 7 using Tapatalk
-
So its been about 2 weeks since I first shot my CZ Accu Shadow. In that 2 weeks I did plenty of dry fire practice. Went to the range and my high/right issue is gone. I shoot it as well as my 2011 now.
Sent from my Nexus 7 using Tapatalk
-
I usually shoot 1911/2011's and Glocks, one thing I noticed is a tendency to shoot high right (my shooting buddy was doing the same too) on my first outing with my SP01. I've been dry firing and I think I have it all worked out now.
Sent from my Nexus 7 using Tapatalk
-
And here's Bobby's Eagle.
Sent from my Nexus 7 using Tapatalk
-
Put the old SS back in and see if it locks back.
Like I mentioned before, it's the SS. I just looked and Wilson doesn't make a extended SS for 9mm. You can try my mags which I know lock the slide back on my 2011's
http://shopwilsoncombat.com/Extended-Slide-Release-Blue/productinfo/7B/
Sent from my Nexus 7 using Tapatalk
-
I just setup a Production belt with a BT Black Ice DOH.
Sent from my Nexus 7 using Tapatalk
-
What shop in Cleveland are you going to?
This was at Pro Armament in Cuyahoga Falls. I only stop by when I'm passing through.
Sent from my Nexus 7 using Tapatalk
-
Here's the test targets.
Sent from my Nexus 7 using Tapatalk
-
Quack,
Just out of curiosity, did you ask the shop why they had it? Did they order it in for themselves to retail or take it in on trade?
Most of my local shops have never even heard of the high end CZ and CZC guns.
They had it for a while, the shop owner likes higher end guns, but the area the shop is in has more tacticool shooters than competitive shooters. It was also in a case with 4-5 Robarized Glocks ($1200+), and those have been there for over a year.
Bobby can probably add more info
Sent from my Nexus 7 using Tapatalk
-
Stop writing and start video taping....haha
Sent from my SAMSUNG-SM-G900A using Tapatalk
Shot it today with Bobby, and forgot to break out the video camera.
A few hundred rounds through it and ran great (except for some of his reloads). I have to cure pulling shots to the right.
Sent from my Nexus 7 using Tapatalk
-
If you would've told me that you found/looking at one, I wouldn't have bought it.
Who am I kidding, I don't like you that much. LOL
Sent from my Nexus 7 using Tapatalk
-
I didn't think so either, but to my surprise it was there.
Sent from my Nexus 7 using Tapatalk
-
Thanks, it was fate. I almost ordered a 75 Shadow Custom last night, but knew I was passing by this shop today.
Sent from my Nexus 7 using Tapatalk
-
and I had to buy it. Sorry Bobby. LOL
Was looking at a few CZC guns for a month or so. I was going to grab a SP01 Custom Shadow Target from Oakhill, but the next morning it was gone.
I'm probably going to take it for a quick spin tomorrow.
Sent from my Nexus 7 using Tapatalk
-
I think the Zev standard triggers are the same (shortened pre-travel and trimmed trigger safety), and approved for Production.
Sent from my Nexus 7 using Tapatalk
-
I have the BladeTech classic OWB for my SS.
Sent from my Nexus 7 using Tapatalk
-
Run it and see what it needs. I replace the trigger with a SVI short flat, Dawson Posi-Lock mag catch (supposed to prevent mag over insertion), Dawson magwell. I also tune my mags so that they are in spec (per Dawson tuning kit) and check/adjust extractor tension. This prevents/fixes feed and extraction issues. With all this done, I haven't had any issues.
As for the why, most have their preferences, and once you find what works, I tend to stick with it.
Sent from my Nexus 7 using Tapatalk
-
Bought my first 9mm on the 1911 platform, and it is coming with a good number of mags, so I was wondering the same thing, as I always here how 9mm in this platform can be problematic. I'm not smart enough to understand why, but hoping it runs consistant with the mags I purchased without tuning.
But if I do need to do some tuning, is the Dawson Prec. kit the way to go?
Mag tuning is for the 2011 mags and not so much the 1911 mags. The DP tuning kit is for the 2011
Sent from my Nexus 7 using Tapatalk
Accu-Shadow availability
in CZ
Posted
I was lucky to find one at a shop. It was sitting there for months. Luckily for me their shop has more tacticool customers and not competition shooters. I also see Oakhill gets them, so keep an eye on their website. A friend picked up a SP01 Custom from them last week. They had at least 5 in stock and they were gone in about 24 hours.
Sent from my Nexus 7 using Tapatalk