eBay toolhead stand product review

[DesertTortoise]

I needed a new stand so I was looking for a deal on eBay.
I decided to try out plastic 3x toolhead stand. Bottom line is that I think this is a good buy.
 

 
Pros:
-costs the same as or slightly less than the single Dillon unit ($23 shipped), but holds 3 vs 1 toolhead
-Takes less bench space than 3 single stands
-is as durable as it needs to be (the product description doesn’t say but it is a thick plastic, not stamped metal)
 
Cons:
-no provision to secure it to the bench
-the shellplate holder is oversized so the plates drop through and rest on the bench top. I had initially thought I may be able to hang this on a peg board, but that is not feasible.
-it’s only as durable as it needs to be (some people don’t like plastic)
 

 
 
Looks like they sell similar stands for 550, 650, Lee, and Hornady
 
Here is a link:
https://www.ebay.com/sch/mcraftdesign/m.html?_nkw=&_armrs=1&_ipg=&_from=
 
I’m have no relationship with this product / seller except that I bought one and like it
 

[78Staff]

I've got one of these as well, had it for about a year, has held up fine.  I only have couple toolheads setup for the 550 now as most have been moved over to the 1050.  This works good for those and keeps them out of the way.

 

[RePete]

As for not mounting to the bench, it's an easy fix.  Position the stand where you want it, drill 2 holes either side of the middle set and screw to the bench.

[slavex]

to mount to peg board there are a couple solutions, put a couple screws through the front of each shell plate spot, so that the plates can insert, but not fall through. Or for a nice finish, just attach a bottom to it and mount that to the peg board.