Jerry Price Posted April 24, 2009 Share Posted April 24, 2009 Do I need to worry about Lyman walnut dust on the inside of cases after media separation? I used the Dillon CV750 for 2 hours and the cases came out looking great. I am new to reloading and this is my first batch of cases -- a mix of 45, 38, and 9mm. Link to comment Share on other sites More sharing options...
Greg Bell Posted April 24, 2009 Share Posted April 24, 2009 A dryer sheet helps cuts down on dust and add a little polish to the media. I use nu-finish liquid car wax slightly thinned. Link to comment Share on other sites More sharing options...
Jerry Price Posted April 25, 2009 Author Share Posted April 25, 2009 A dryer sheet helps cuts down on dust and add a little polish to the media. I use nu-finish liquid car wax slightly thinned. I cut up 2 used drier sheets and used 2 caps full of Dillon case polishing compound. Link to comment Share on other sites More sharing options...
G-ManBart Posted April 25, 2009 Share Posted April 25, 2009 Try new dryer sheets....they seem to collect dust better. To answer the question, I wouldn't worry about the dust...shouldn't hurt anything as it's pretty close to inert. If you want to save a little money, get crushed walnut at your local pet supply store.....just as good and much cheaper. R, Link to comment Share on other sites More sharing options...
Chills1994 Posted April 25, 2009 Share Posted April 25, 2009 But once you get the crushed walnut shells (most likely sold as "Lizard Litter" at the pet stores, or as blasting media to auto body/paint shops), just be sure to seperate your calibers from each other before you tumble. the 9's will get stuck inside the .40's or the .45's and then the .40's will get stuck inside the .45's. then you will have to pry the stuck cases apart from each other by hand. It's one of those things you only do once and then chalk it up as a lesson from the School of Hard Knocks. Link to comment Share on other sites More sharing options...
Tom E Posted April 25, 2009 Share Posted April 25, 2009 When it starts getting dusty while you're seperating cases from the media it's time to add a little water to the media. Doesn't take much and fixes the problem. Link to comment Share on other sites More sharing options...
Chills1994 Posted April 25, 2009 Share Posted April 25, 2009 I have used the dryer sheet thing. I use the been through the dryer once already sheets, NOT the new sheets. I have also used Nu Finish, adding a little bit, maybe at most a cap full at any one time while it's just the media tumbling and then used a stick to stir it up and break up the clumps. What I do now that also cuts down on the dust is to dribble in some odorless mineral spirits, again while the machine is running. Back when I was running an ink stripe around the outside of the case and NOT just the headstamp stripe thing, the mineral spirits seemed to really cut through and remove the old ink stripe. I still do the mineral spirits thing eventhough I NO longer stripe around the case. It still cuts down on the dust. And just as another precaution, I always make sure my face is clean shaven and put on a dust mask when using the bingo roller type of media seperator that I have. Link to comment Share on other sites More sharing options...
Boats Posted April 25, 2009 Share Posted April 25, 2009 Plain old paper towels will absorb the dust too, I use the blue shop towels cause thats whats close by when tumbling, cut one sheet into 4 parts and toss in with the media. Boats Link to comment Share on other sites More sharing options...
Joe4d Posted April 25, 2009 Share Posted April 25, 2009 I quit using nut shell media, a lot less dust with corncob even though it is a little slower. And pound for pound that Lyman media has got to be the most expensive option on the market. Even not getting fancy you can order bulk say 25lbs of media with shipping for the same price they charge for the gallon jugs. Link to comment Share on other sites More sharing options...
atbarr Posted April 25, 2009 Share Posted April 25, 2009 Even not getting fancy you can order bulk say 25lbs of media with shipping for the same price they charge for the gallon jugs. URL please. Thanks, A.T. Link to comment Share on other sites More sharing options...
Joe4d Posted April 25, 2009 Share Posted April 25, 2009 http://www.petsmart.com/product/index.jsp?productId=3055974 I am sure you could shop around also, I see your in KY check with some local feed stores. Link to comment Share on other sites More sharing options...
Jerry Price Posted April 25, 2009 Author Share Posted April 25, 2009 Thanks for all your tips! I think I'll try some of the Petsmart corn cob litter and see if that cleans up the remaining dust. Link to comment Share on other sites More sharing options...
Chills1994 Posted April 26, 2009 Share Posted April 26, 2009 FWIW, I stopped by Wally World today to take a look at what they had for media... either ground up corn cob or crushed walnut shells. I found the bags of kinda sorta ground corn cob by the company Hart (yeah, like the flea collars). I was trying to get an apples to apples comparison. The outside of the bag was printed with some info that it was so many cubic miles of corn cob or some other such nonsense It was priced at $4.17 a bag. The price tag on the shelf also said it was 8 pounds. Hmmn??? So I took it up to the check out lane. The gal weighed it on her produce scale. It was actually 6.6 pounds. NOT 8 pounds as listed on the price tag on the shelf. So I put it back on the shelf. I will probably just call some auto body/paint shop suppliers tomorrow to see what they have for blasting media. Link to comment Share on other sites More sharing options...
Thomas a44592 Posted April 28, 2009 Share Posted April 28, 2009 I use liquid car wax- squirt a good amout in the media -add the brass and turn it on immediately. I have been using the same media a very long time and I use the car wax every batch and the media looks dark but the cases come out shiny with no dust. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now