Tattoo Posted June 30, 2008 Share Posted June 30, 2008 (edited) Hey all, I'm using Titegroup right now and its OK, just wondered if anyone has a Glock 34 minorload that is crazy accurate and feels good too. I'm using 4.0gr of Titegroup and 124 jhp MG. I guess I can't let go of my Highpower roots. Just want to get as good a hit as I can hold............. Thanks, T Edited June 30, 2008 by Tattoo Link to comment Share on other sites More sharing options...
HoMiE Posted June 30, 2008 Share Posted June 30, 2008 If your shooting for groups, your shooting too slow. Link to comment Share on other sites More sharing options...
Ausglock Posted June 30, 2008 Share Posted June 30, 2008 (edited) G'day. G34 with a Storm Lake barrel. 4.5gr Win 231 with a 115 gr Round nose coated lead. WSP primer in Win brass. 135 P/Factor and groups into 1.5" at 25 yards rested. Hooroo. Regards, Trevor. Grafton, OZ G17, G34, G35(357sig) Edited June 30, 2008 by Ausglock Link to comment Share on other sites More sharing options...
Tattoo Posted June 30, 2008 Author Share Posted June 30, 2008 If your shooting for groups, your shooting too slow. Dude I already know I'm shooting too slow Just want to know if I actually hold tight on a 35yrd popper I will actually hit it. If I miss I want it to be my fault, not the ammo. T Link to comment Share on other sites More sharing options...
Tattoo Posted June 30, 2008 Author Share Posted June 30, 2008 G'day.G34 with a Storm Lake barrel. 4.5gr Win 231 with a 115 gr Round nose coated lead. WSP primer in Win brass. 135 P/Factor and groups into 1.5" at 25 yards rested. Hooroo. Regards, Trevor. Grafton, OZ G17, G34, G35(357sig) Thanks man, I got a buddy who uses 231 and 4.4gr w/ 124's, so I am going to try his loads in my 34 too. T Link to comment Share on other sites More sharing options...
SA Friday Posted June 30, 2008 Share Posted June 30, 2008 Hey all,I'm using Titegroup right now and its OK, just wondered if anyone has a Glock 34 minorload that is crazy accurate and feels good too. I'm using 4.0gr of Titegroup and 124 jhp MG. I guess I can't let go of my Highpower roots. Just want to get as good a hit as I can hold............. Thanks, T That's not a bad load as it is. Nothing wrong with that bullet or powder. The only real way you can tell if it's accurate is to benchrest shoot it out of your G34. Titegroup shoots very accurate out of my G34 and G17, and MG bullets are about as good as it gets. If it functions, makes pf, and can shoot within 2 or 3 inches at 25 yards from a bench don't change anything with the load. Link to comment Share on other sites More sharing options...
austex Posted June 30, 2008 Share Posted June 30, 2008 (edited) I'm using 5.8 gr Long Shot and 115 gr MG CMJ loaded at 1.145 OAL in my G34. Chrono'd at 135 PF at 95 degrees at 300 ft elevation. Bench rest at 25 yds produced 1.5 inch or smaller groups. Edited June 30, 2008 by austex Link to comment Share on other sites More sharing options...
Jman Posted June 30, 2008 Share Posted June 30, 2008 Got two I use depending on what components I scrape up. 125gr Black "billybullet" and 3.4grs Clays with a 1.160 OAL 147gr Rainer Plated and 3.4grs TightGroup with a 1.160 OAL Can't decide witch I like most. Used in my G17. Jim Link to comment Share on other sites More sharing options...
Flexmoney Posted July 1, 2008 Share Posted July 1, 2008 Just want to know if I actually hold tight on a 35yrd popperI will actually hit it. If I miss I want it to be my fault, not the ammo. I shoot lights out on the plate rack at 35y with my G34 and TG. If you are holding tight on a 35y popper and missing...it's probably not the fault of the ammo. Link to comment Share on other sites More sharing options...
Tattoo Posted July 1, 2008 Author Share Posted July 1, 2008 (edited) Just want to know if I actually hold tight on a 35yrd popperI will actually hit it. If I miss I want it to be my fault, not the ammo. I shoot lights out on the plate rack at 35y with my G34 and TG. If you are holding tight on a 35y popper and missing...it's probably not the fault of the ammo. Actually I think the load is pretty good. I can't complain as it will easily put 10 rounds into the zero down center of an IDPA target at 25yds shooting offhand. Just wondered if anyone had an even better load. Its more than acceptable for our sport. Always looking for something thats better............ T Edited July 1, 2008 by Tattoo Link to comment Share on other sites More sharing options...
Joe D Posted July 1, 2008 Share Posted July 1, 2008 One of the "standard" loads for 9mm is 3.0 - 3.2 gr of Titegroup with a 147. I used Titegroup for years before switching to Solo 1000. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now