Carmoney Posted January 7, 2010 Share Posted January 7, 2010 Advantages: 1. Eliminates peening at the cylinder stop notches that is sometimes seen on stainess cylinders (and I believe largely caused by rough gun handling practices). 2. Because the Ti cylinder is lighter in weight, it reduces the shooter's perception of the cylinder rotating on its axis. This may arguably reduce DA trigger pull, but the difference is pretty minute. 3. The gun will feel lighter. This can be an advantage, and allow snappier transitions from target to target. Disadvantages: 1. Some (but not all) of the Ti cylinders are sticky. 2. The gun will feel lighter. This can also be a disadvantage by reducing absorption of felt recoil. 3. Cost. For most shooters, they're not really worth the cost. For those who have the peening problem, they're worth every penny. Link to comment Share on other sites More sharing options...
Aglifter Posted January 7, 2010 Share Posted January 7, 2010 I had Apex Tactical build a 625 for me w. a Ti Cylinder -- never had a problem, other than being difficult to clean. I had it duracoated, so that I could clean it easier, and ended up w. sticky cylinders. I've been very, very happy w. that gun. Link to comment Share on other sites More sharing options...
scottyinAZ Posted January 8, 2010 Share Posted January 8, 2010 I got a Ti cyl a few weeks ago for my 625PC that took a trip back to smith for a new cylinder after 900 rounds. i have not fired the gun with the new stainless cyl, i knew i was going to be a Ti convert. I must beat the piss out of the trigger or the stainless is very soft. whatever the case, if i want a 625 that holds up more than a few months i need to install Ti. Now i need another Ti cyl for my back up gun. Link to comment Share on other sites More sharing options...
rrickysee Posted January 9, 2010 Share Posted January 9, 2010 I pick up a Ti cylinder a week ago from SSS. I spoke with Kenny he had the order in with S&W for over 8 months. He got 5 in and I picked up the last one. Lucky Maybe we will see these available in greater numbers soon. Link to comment Share on other sites More sharing options...
rjkelso Posted January 14, 2010 Share Posted January 14, 2010 Advantages: 1. Eliminates peening at the cylinder stop notches that is sometimes seen on stainess cylinders (and I believe largely caused by rough gun handling practices). 2. Because the Ti cylinder is lighter in weight, it reduces the shooter's perception of the cylinder rotating on its axis. This may arguably reduce DA trigger pull, but the difference is pretty minute. 3. The gun will feel lighter. This can be an advantage, and allow snappier transitions from target to target. Disadvantages: 1. Some (but not all) of the Ti cylinders are sticky. 2. The gun will feel lighter. This can also be a disadvantage by reducing absorption of felt recoil. 3. Cost. For most shooters, they're not really worth the cost. For those who have the peening problem, they're worth every penny. Mike when you say "rough gun handling practices" what do you mean? Rick Link to comment Share on other sites More sharing options...
Carmoney Posted January 14, 2010 Share Posted January 14, 2010 Mike when you say "rough gun handling practices" what do you mean? Slamming the cylinder closed with unnecessary force. Link to comment Share on other sites More sharing options...
The_Shadow Posted January 21, 2010 Share Posted January 21, 2010 Made a call to S&W spoke with a rep, they suggested cleaning the cylinder thoroughly and that it could be some roughness that may need polishing out. They recommended cleaning first then test firing, they sent a fedex label just in case. I had polished (Steel) cylinders before, so I cleaned and polished the Ti cylinders, so far so good, will shoot full match this saturday. I ahve a Model 28 with the steel cylinder and there is a difference you can feel between the two, both have had an action job, though the Model 22 is more radical, bobbed and skeletonized hammer. I can really feel the heft of the steel cylinder in the 28. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now