randy01 Posted August 30, 2006 Share Posted August 30, 2006 I've loaded up some Ranier 147gr bullets over 3,4gr of VV320. OAL 1.14 and I'm only registring 95PF what am I doing wrong. Grtz Randy Link to comment Share on other sites More sharing options...
BlackSabbath Posted August 30, 2006 Share Posted August 30, 2006 If that doesn't work for you, try 4.0 grains of Winchester Super Field. 137 pf out of a Glock-17. Link to comment Share on other sites More sharing options...
Skywalker Posted August 30, 2006 Share Posted August 30, 2006 (edited) Randy, even if the Vihtavuori 2006 reloading guide doesn't list N320 loads for 9x19mm with a Rainier 147grs, judging from the following listed load: 147grs HP/XTP Hornady bullet, 3.1 grs N320, 1.142 O.A.L., clocking @ 784 fps in a 4" barrel. I'd say that your're on the light side of this load. For reference the same manual lists: 147grs HP/XTP Hornady bullet, 3.9 grs N320, 1.142 O.A.L., clocking @ 978 fps 147grs RN Rainier bullet, 3.5 grs N330, 1.142 O.A.L., clocking @ 893 fps 147grs RN Rainier bullet, 3.8 grs N330, 1.142 O.A.L., clocking @ 942 fps (max load) all in a 4" barrel. Edited August 30, 2006 by Skywalker Link to comment Share on other sites More sharing options...
lynn jones Posted August 30, 2006 Share Posted August 30, 2006 some chronos have trouble with some bullet profiles. if the rainer bullet is cooper, try blackening it with a black sharpie. lynn Link to comment Share on other sites More sharing options...
Chris Keen Posted August 30, 2006 Share Posted August 30, 2006 I shoot 3.3 gr of N-320 under Rainier 147 gr FP bullets, and I get 129PF out of a G-17 with stock barrel. Not sure about my Overall Length....... Are you putting enough of a (taper) crimp on them ? Link to comment Share on other sites More sharing options...
Loves2Shoot Posted August 30, 2006 Share Posted August 30, 2006 I'm using vv320 3.6 grains zero 147 for 140 pf in my XD's. Link to comment Share on other sites More sharing options...
raz-0 Posted August 30, 2006 Share Posted August 30, 2006 I've loaded up some Ranier 147gr bullets over 3,4gr of VV320. OAL 1.14 and I'm only registring 95PF what am I doing wrong.Grtz Randy Based on my own experiences, quite possibly just using your chrono wrong. i was aware that getting too close could give you high numbers form gas/particulates shot out at high speeds. However, I also found that if you are far enough away to avoid that, but still too close, and the wind is going the wrong way, then you can get artifically low readings especially if your round is smoky. I learned this chronoing my LS-9 which produces noticable smoke from loads that were fairly clean burning in my fullsize gun. After figuring this out I came out with an average velocity of about 1016. Drifting smoke was causing readings as low as 504fps. Link to comment Share on other sites More sharing options...
bgary Posted August 30, 2006 Share Posted August 30, 2006 are you doing your chrono'ing indoors, under artificial lighting? Flourescent lights can really mess up chrono readings.... B Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now