rvandermillion Posted July 21 Share Posted July 21 I was given a box of brass at the range the other day from someone that said they had 38 super/supercomp brass that they picked up from the range that failed case gauging after being sized. Upon looking at the brass it appears that the majority of the brass is stamped 9 super comp or 9x23 comp which is the same to my knowledge. Can this brass be used or is it useless due to being undersized by the 38 super dies removing the 9x23 taper? I was wondering if I could just roll size it using a 38 super roll sizer and shoot it like 38 super. Thanks Robbie Link to comment Share on other sites More sharing options...
shred Posted July 21 Share Posted July 21 You end up with the back end that can't be sized being too large. It'll work in some Supercomp chambers but it's not the best plan. Link to comment Share on other sites More sharing options...
MikeyScuba Posted July 21 Share Posted July 21 I picked one up and unknowingly loaded it and during case gauging the bullet fell out which is how I found it. Link to comment Share on other sites More sharing options...
rvandermillion Posted July 21 Author Share Posted July 21 That was what I was thinking. I might just load a few to see how they work in my 38SC and if they work then load them for practice and leave them, if not then just pitch them in the trash. Link to comment Share on other sites More sharing options...
busdriver Posted July 22 Share Posted July 22 Size it with a 9mm die, then load as normal. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now