Dfehr401 Posted March 15 Share Posted March 15 (edited) I took everything apart and cleaned. It still seems to be binding up and I cant get the primer tray to line up with the 2nd station. Any ideas? I randomly lines up like every 10th pull. Edited March 15 by Dfehr401 Info Link to comment Share on other sites More sharing options...
Farmer Posted March 15 Share Posted March 15 (edited) @Dfehr401 Did you look here? Edited March 15 by Farmer Link to comment Share on other sites More sharing options...
ParrytheWind Posted March 15 Share Posted March 15 Is everything clean? Shell plate too tight? That's where I would start. Link to comment Share on other sites More sharing options...
Philip Dedmon Posted March 15 Share Posted March 15 If you have a Manual go to page 44 (at least in my manual it's page 44) might find you fix there. Link to comment Share on other sites More sharing options...
dillon Posted March 15 Share Posted March 15 First, clean and grease the primer disc axle pin. This is the most common cause for the disc failing to rotate fully. If this does not correct the problem, then shim the primer arm cam, the black polymer cam bolted to the upper right front frame strut with a piece of cardboard. If this corrects it, then contact Dillon for a replacement cam, as yours is worn. Link to comment Share on other sites More sharing options...
Dfehr401 Posted March 19 Author Share Posted March 19 So I found the culprit cleaned and lubed but it still is way off as far as alignment. Ill have to call Dillon when I get a chance. Link to comment Share on other sites More sharing options...
mmc45414 Posted March 19 Share Posted March 19 8 hours ago, Dfehr401 said: So I found the culprit. I am surprised that didn't alert you to the problem with a loud pop! Link to comment Share on other sites More sharing options...
dillon Posted March 19 Share Posted March 19 call or email us and ask for an alignment tool. If you email, please include your address. Link to comment Share on other sites More sharing options...
Dfehr401 Posted March 19 Author Share Posted March 19 5 hours ago, dillon said: call or email us and ask for an alignment tool. If you email, please include your address. Thank you! Link to comment Share on other sites More sharing options...
Dfehr401 Posted March 19 Author Share Posted March 19 12 hours ago, mmc45414 said: I am surprised that didn't alert you to the problem with a loud pop! Me too when I saw i saiddto my self yikes that could have been bad lol Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now