mcoliver Posted November 8, 2005 Share Posted November 8, 2005 Recently widened my rear notch so I had to re-zero my Standard gun and found a problem. If I cant the gun up such that I can see the front sight alone, it appears straight, crisp and rectangular. If I drop it down in the notch, the right side curves inwards a bit making it appear like its bent to the right. Anybody else experienced this? How did you solve it? Appreciate any feedback. Thanks. And please don't tell me to buy a cmore. Link to comment Share on other sites More sharing options...
benny hill Posted November 8, 2005 Share Posted November 8, 2005 sounds like you filed the rear crooked Link to comment Share on other sites More sharing options...
DaBlaster Posted November 8, 2005 Share Posted November 8, 2005 I don't suppose that your rear sight pin is broke and allowing one side to be a bit higher? Link to comment Share on other sites More sharing options...
Joe D Posted November 8, 2005 Share Posted November 8, 2005 Do you have any astigmatism? I have a slight amount that causes the rear sight to appear slightly canted though it is not. Link to comment Share on other sites More sharing options...
raz-0 Posted November 8, 2005 Share Posted November 8, 2005 Well, I had a similar problem on my 1911. It was half optical illusion and half physical problem. The optical illusion part was due to it having a tritium insert in it, and the insert was off-center. The physical problem turned out to be the pin that the adjustable rear sight hinges on either cracked and had part fall out, was two pieces and had part fall out, or was just way short for the sight from the factory. Link to comment Share on other sites More sharing options...
SRT Driver Posted November 8, 2005 Share Posted November 8, 2005 The FO insert in my sight looks like it is more to the right side of the front sight sometimes..off center. So I measured it. It's right in the middle. Light does funny things. Link to comment Share on other sites More sharing options...
mcoliver Posted November 9, 2005 Author Share Posted November 9, 2005 I checked the sights again last night. Benny was right, the right side of the notch was a teeny bit crooked. So I cleaned it up a bit. Then I discovered a little detail that I didn't see before. I'm right-eye dominant but if the light hits my rear sights in a certain way, I can see the shiny side (right, front area) of the notch wall with my left. I realized I may be using this "false" side when sighting in. Hopefully, I can get this little annoyance fixed when I cold blue this area. Thanks for the replies guys. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now