ysrracer Posted September 21, 2020 Share Posted September 21, 2020 I hope it's ok to post this here. Just trying to help out. 38 Cal (.357 - .358) - American Reloading https://americanreloading.com/en/392-38-cal-357-358 I'm not sure if you need any, but they're in stock Link to comment Share on other sites More sharing options...
pskys2 Posted September 22, 2020 Share Posted September 22, 2020 105.98/thousand isn't a bad price for FMJ either. Link to comment Share on other sites More sharing options...
GMM50 Posted September 22, 2020 Share Posted September 22, 2020 Sized .357 Link to comment Share on other sites More sharing options...
ysrracer Posted September 22, 2020 Author Share Posted September 22, 2020 I thought with FMJ we wanted .357, and plated we wanted .358? Do I have that wrong? Link to comment Share on other sites More sharing options...
pskys2 Posted September 23, 2020 Share Posted September 23, 2020 On 9/22/2020 at 11:22 AM, ysrracer said: I thought with FMJ we wanted .357, and plated we wanted .358? Do I have that wrong? .358 for lead/moly/poly coated, .357 for jacketed and all of the Plated I've had were sized .357. Link to comment Share on other sites More sharing options...
FWSixgunner Posted October 10, 2020 Share Posted October 10, 2020 .358 for lead/moly/poly coated, .357 for jacketed and all of the Plated I've had were sized .357.There’s no one-size-fits-all rule for cast bullets. They need to be sized to fit your chamber throats.Every Smith .357 I’ve ever owned had VERY tight .357 throats that a .358 bullet wouldn’t slip through without a lot of effort. Link to comment Share on other sites More sharing options...
pskys2 Posted October 11, 2020 Share Posted October 11, 2020 18 hours ago, FWSixgunner said: There’s no one-size-fits-all rule for cast bullets. They need to be sized to fit your chamber throats. Every Smith .357 I’ve ever owned had VERY tight .357 throats that a .358 bullet wouldn’t slip through without a lot of effort. With Jacketed/Plated there are no choices. With Lead, and to a degree Poly/Moly, you are getting into the weeds. And I'll scratch that itch... The reason to match the throats to bullet diameter is for accuracy, and even then it's not always the final point to consider. Why it's always best to test for usable results, getting the exact fit for that last 1/4" at 50 yards may not be the best choice depending on velocity/PF/leading/availability/cost or even chamber fit (if speed loads are required). Velocity, pressures and even leading are also affected by this fit. Yet there is a relatively wide range of fit that will work. In mass produced Revolvers it is not uncommon to find multiple sized throats in one cylinder. So with all of that being said, the accepted standard for and, the general availability of, cast/moly/poly bullets are .001" over the bore size/standard Jacketed size. For the action sports it generally works out well. For Bullseye, Bianchi or Masters type competitions it is definitely a point to consider as accuracy is at a premium in them. Doug Koenig reportedly had a solid bench fixture for his barrels so he could work up loads to the absolutely tightest accuracy he required. I'm sure it would be wise to at least utilize a solid Ransom Rest to search out the best load in a particular blue printed Revolver. Link to comment Share on other sites More sharing options...
ysrracer Posted October 11, 2020 Author Share Posted October 11, 2020 Yeah, no. It's not the .001 of an inch that's keeping me from master class. Link to comment Share on other sites More sharing options...
pskys2 Posted October 11, 2020 Share Posted October 11, 2020 (edited) 6 hours ago, ysrracer said: Yeah, no. It's not the .001 of an inch that's keeping me from master class. Nah just finding enough moola to get enough bullets to practice enough to be great! That's what I keep saying, I'm an eternal optimist If I just practice enough, and correctly, I too can be a Champion! It's just how hard one wants, or can afford, to work! Though some do seem to start with a lot more skills! Edited October 11, 2020 by pskys2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now