chp5 Posted September 8, 2005 Share Posted September 8, 2005 My second “how to” revolver question I may just have to bust out my S&W model 19 for a match sometime and let the good revolver shooters use me as a door mat Anyway, I picked up an old S&W model 37. I really like this little revolver! However, the trigger is serrated and sharp on the edges. After a little dry fire, I got a blister on my trigger finger. Is there an easy way to smooth out the trigger face and edges with my trusty Dremel? Also, is taking the side plate off a J frame the same as a K frame? Thanks! Cy Link to comment Share on other sites More sharing options...
Carmoney Posted September 8, 2005 Share Posted September 8, 2005 Yep, use a dremel or foredom tool, start with the little sanding drum to shape and smooth it, switch to the cratex tip to rough-polish it, then finish polishing it by hand with fine sandpaper and steel wool. If you want a high polish result, buff it with Flitz. That's it. Same routine with the sideplate. You'll need a paper clip or something similar to retain the coil mainspring before you can take it the rest of the way apart. Link to comment Share on other sites More sharing options...
chp5 Posted September 8, 2005 Author Share Posted September 8, 2005 Thanks Mike! Link to comment Share on other sites More sharing options...
bountyhunter Posted September 8, 2005 Share Posted September 8, 2005 SW triggers are case hardened. You will likely wear out a set of files trying to smooth the serrations off a trigger (I just tried on my model 14). If you can get through the hardened part (about .010" deep) you can probably smooth it. I never got that deep. Link to comment Share on other sites More sharing options...
spook Posted September 8, 2005 Share Posted September 8, 2005 Or, you can continue to dry fire. The blister will go away and you will get used to it (I swear! ) Link to comment Share on other sites More sharing options...
Carmoney Posted September 9, 2005 Share Posted September 9, 2005 SW triggers are case hardened. You will likely wear out a set of files trying to smooth the serrations off a trigger <{POST_SNAPBACK}> Bounty, that's why we use the dremel tool for this task! Dremels are not for internal action work (except for certain limited tasks in knowledgeable hands), but they are the only way to fly for reshaping triggers and hammers. A sanding drum on a dremel will buzz those serrations away in no time flat. I've done dozens that way. Link to comment Share on other sites More sharing options...
DougCarden Posted September 9, 2005 Share Posted September 9, 2005 and for those who dont want to mess with it, I have several N frame triggers that are polished that I took out of my guns when I put serrated triggers in! DougC Link to comment Share on other sites More sharing options...
10mmdave Posted September 9, 2005 Share Posted September 9, 2005 and for those who dont want to mess with it, I have several N frame triggers that are polished that I took out of my guns when I put serrated triggers in! DougC <{POST_SNAPBACK}> I thought you sold those to me How many do you have Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now