dlp40cal Posted December 22, 2018 Share Posted December 22, 2018 can any one tell me if you can ream the barrel on tanfoglio 9mm open barrel . if so please tell me where to get reamer .currently i shoot stage last bullet stuck in barrel have to fire out oal is 1.165 and they very a little using 650 to load .if i can get out to 1.180 in barrel should be fine. thanks for any help. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted December 22, 2018 Share Posted December 22, 2018 You can buy a 9mm clymer finishing reamer through Brownells for around $80. Finishing reamer, not a chamber reamer. Or send the barrel to Patriot Defense, they do a great job fast. For what it’s worth, I have a really high end carbide reamer that’ll cut any 9mm barrel out there no matter how hard it is. I can do it too if you like. Link to comment Share on other sites More sharing options...
dlp40cal Posted December 23, 2018 Author Share Posted December 23, 2018 tell me how much to ream it out to 1.180 i load around 1.165 vary to 650 and how long it will take thanks Link to comment Share on other sites More sharing options...
MacLethal Posted December 23, 2018 Share Posted December 23, 2018 The reaming process from Patriot Defense is fast and reasonably priced at $40. I believe that includes return shipping. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
dlp40cal Posted December 23, 2018 Author Share Posted December 23, 2018 thanks Link to comment Share on other sites More sharing options...
Kixx Posted December 23, 2018 Share Posted December 23, 2018 +1 on using PD’s reaming service. They did my Stock 2 barrel with great results. I sent them a few dummy rounds with different OAL, bullet profiles, etc. to make sure they had examples of everything I might load. Turnaround was very fast. Just a couple days iirc. Link to comment Share on other sites More sharing options...
oddjob Posted December 24, 2018 Share Posted December 24, 2018 Same here....PD is good to go! Link to comment Share on other sites More sharing options...
dhdeal Posted December 26, 2018 Share Posted December 26, 2018 I wonder how long of an OAL your magazines will hold. When I bought my Limited from PD earlier this year, I could load them pretty long and pass a plunk test (1.16") but some of my magazines would allow the rounds to get stuck when I loaded over 17 rounds (all have the Henning +3-5 base pad). When I shortened the OAL to 1.15" and under, the magazines ran fine. I'm not loading them for a specific power factor, but for best accuracy. They run +/- 1100 fps with a 124 RMR FP and Sport Pistol. PD did their ream service as part of the package so I never knew what the factory chamber was. I also run a pair of 2011's that allow a long OAL so I can just load OAL to a "standard" and let them eat. The 2011's shoot everything great, but the Limited is picky about what it likes. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now