drpatt92@msn.com Posted August 11, 2005 Share Posted August 11, 2005 I'm in need of advice regarding where to begin building an open class shotgun. I've previously owned a Bennelli M1 Super 90 and truth be told, it beat me senseless. There is no doubt that they have to be the most reliable shotgun made. They're impossible to jam and they always work...but they seemed to me to be very punishing. That said, I'm thinking about building an open class shotgun for 3 gun. My question is, which shotgun should I start with, the Bennelli or a Remaington 1187? Some of you may say, send a check to JP and have them build one but, I do enjoy doing the work on my firearms. Thanks in advance for the input. Brian Link to comment Share on other sites More sharing options...
Middle Man Posted August 11, 2005 Share Posted August 11, 2005 Buy a Remington 1100 or 1187 from you local pawn shop. I got my 1100 for $150.00. There's plethora of accessories out there for them too. Link to comment Share on other sites More sharing options...
Middle Man Posted August 11, 2005 Share Posted August 11, 2005 Oh and I forgot great place to have your barrel cut down and threaded for chokes as well as some of the best quality and best priced tubes on the market is Trulock Chokes in Georgia. http://www.trulockchokes.com/ Full Disclosure: The least I can do is plug them for giving me free tubes... Link to comment Share on other sites More sharing options...
wsimpso1 Posted August 12, 2005 Share Posted August 12, 2005 What gun to start with? Depnds on two things: How much money are you willing to spend, and how much recoil do you like? If you do not like recoil, go with a gas op. If recoil is just not an issue for you, you might like the Benelli. Barely used M1100's and M1187's are very available, there are plenty of parts/accessories to make them into your idea of a practical shotgun and there are good 'smiths that know how to make them slick and fast and reliable, or even go Open. This is the low buck/low recoil route. I have less than $400 in my shotgun this way, and I have a reliable, fast handling, fast loading Standard shotgun. New M1100/1187's and the Browning and Win autos are all good and used. These guns will all do nicely, and there are 'smiths that know how to make them run, or even go Open. This route costs more but is a low recoil route. Then there are the recoil operated guns, primarily Benelli. Standard only. You have to tolerate more recoil - that is how they work. They will misbehave if you add weight or a brake to them. The payoff is they are lighter and faster on the transitions. And there are good 'smiths out there too. So, like many things, you get to pay your money and make your choice. Good luck and welcome to a fun game. Billski Link to comment Share on other sites More sharing options...
davidwiz Posted August 12, 2005 Share Posted August 12, 2005 What gun to start with? Depnds on two things: How much money are you willing to spend, and how much recoil do you like? If you do not like recoil, go with a gas op. If recoil is just not an issue for you, you might like the Benelli. I weight maybe 135lbs with all my clothes on and I've been using a Benelli since I started in 3-Gun. I've never had a problem with the recoil. I recently had Beven Grams do his thing to my M1S90 and to me, it seems to have less felt recoil now. Basically, I would try out a Rem 1100/11-87, M1S90, and a SX2 and see what works best for you. -David Link to comment Share on other sites More sharing options...
Bronco Posted August 12, 2005 Share Posted August 12, 2005 The new Benelli M 2 has a lot less felt recoil than previous models. I think I'd go with a SX2, you might quizz Mike 45 as he is building an open SX2. Link to comment Share on other sites More sharing options...
texasag93 Posted August 14, 2005 Share Posted August 14, 2005 SX2 if you are recoil sensitive. I really love recoil and my M1 S90 TXAG Link to comment Share on other sites More sharing options...
drpatt92 Posted August 15, 2005 Share Posted August 15, 2005 I bought my Benelli back in 1990 and used it very little. When I did I never finished shooting that didn't leave me with a buised shoulder. Really, I'm not that dainty. I found it uncomfortable to shoot and subsequently didn't shoot it often. That's why I sold it. Now, truth be told, I could kick myself right about now since it's a great 3 gun shotgun. I've been modifying my M-15 for the last few months and it's turning into an impressive rifle. At this point I'd like to do the same thing with a shotgun. I'm also interested in what you folks consider essential modifications. Thanks again for your input. Brian Link to comment Share on other sites More sharing options...
rishii Posted August 16, 2005 Share Posted August 16, 2005 I bought my Benelli back in 1990 and used it very little. When I did I never finished shooting that didn't leave me with a buised shoulder. Really, I'm not that dainty. I found it uncomfortable to shoot and subsequently didn't shoot it often. That's why I sold it. Now, truth be told, I could kick myself right about now since it's a great 3 gun shotgun.Brian <{POST_SNAPBACK}> My experience mirrors yours exactly, and sold my super 90 for the same reason. I'm getting in a remington 1100 with a 23" barrel, with the hope to get it to run with light loads. I've read about drilling the gas port larger and plan to try that. I'm wondering if anyone has tried SRM preformance surecycle system. it looks like a replacement recoil spring and stanless plug, and comes with a light spring for light loads and heavy one for buck. http://www.surecycle.com/default.asp Link to comment Share on other sites More sharing options...
davidwiz Posted August 16, 2005 Share Posted August 16, 2005 After I got back from the SMM3G match, where I used a M1S90, my shoulder barely had a mark on it and wasn't sore. Link to comment Share on other sites More sharing options...
Shooter Grrl Posted August 17, 2005 Share Posted August 17, 2005 I'm in need of advice regarding where to begin building an open class shotgun. I've previously owned a Bennelli M1 Super 90 and truth be told, it beat me senseless. There is no doubt that they have to be the most reliable shotgun made. They're impossible to jam and they always work...but they seemed to me to be very punishing. <{POST_SNAPBACK}> Get another Benelli. I went out and bought a 20ga cause I didn't like getting beat to crap while shooting - I'm switching back! The reliability is WAY worth a little extra pain. Also, you can add "stuff" to reduce the beatings. (Not sure what, just know it's out there and it works - I'm not very technical!) Link to comment Share on other sites More sharing options...
drpatt92@msn.com Posted August 24, 2005 Author Share Posted August 24, 2005 I found a Remington 1100 with a 26" barrel, 12 ga with synthetic stocks for a good price so I'm going to begin there. I ordered a Choat 10 rnd tube and bolt lever for it to start. I'm thinking in a few months, I may have a JPoint installed. Porting? Any thoughts here folks? Will it make a significant difference? Brian Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now