PatriotDefense Posted January 5, 2018 Share Posted January 5, 2018 Does anybody have any idea when they updated the weights on the Stock II and III pistols? I think they where well over do for updating as i cant remember when the last time i received a stock II under 45oz out of the box. Sorry if this is old news just now catching up to ensure some future projects are not held up. The information below was taken straight from USPSA.org TANFOGLIO Website: www.tanfoglio.it Notes: (Stock Custom model is NOT approved for Production Division) Weights for some Stock II and III pistols changed 91616 Stock II (44 oz.) Stock III 9mm (45.85 oz.) Stock III 9X21 and 38 Super (45.85 oz.) Stock III Xtreme 4.93" Barrel9mm (49.4 oz.) Stock III Special 4.93" Barrel 9 (49.4 oz.) Stock III (witness Elite) 4.93" (49.4 oz.) Stock II Xtreme 4.50" barrel 9mm (47.6 oz.) Stock II L 4.93" barrel 9mm 9X21 (49.4 oz.) Stock II (Witness Elite Stock II (47.6 oz.) Notice how they specifically call out the "Witness Elite Models" for the Stock II and III pistols. I always recall the 44oz number being thrown around but that more than likely was based off a small frame pistol. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted January 5, 2018 Share Posted January 5, 2018 Oh terrific. Now we have two weights for the same gun in the production list. Link to comment Share on other sites More sharing options...
SCTaylor Posted January 5, 2018 Share Posted January 5, 2018 "Weights for some Stock II and III pistols changed 91616" Not sure if that's when Tanfo started reporting different weights or when USPSA updated? Link to comment Share on other sites More sharing options...
happygunner77 Posted January 6, 2018 Share Posted January 6, 2018 Is the 44oz small frame and the 47.6 large frame? Link to comment Share on other sites More sharing options...
Ck867 Posted January 12, 2018 Share Posted January 12, 2018 The USPSA website was recently updated but I am unsure about the weight on the guns. There was also the time period between when Tanfos had the solid vs hollowed out grip area on the frame where the hammer spring sits. Link to comment Share on other sites More sharing options...
Ck867 Posted January 13, 2018 Share Posted January 13, 2018 Link to comment Share on other sites More sharing options...
IHAVEGAS Posted January 18, 2018 Share Posted January 18, 2018 (edited) I don't think USPSA updates anything by rote. I believe the process is the same for updating as for adding a new pistol, i.e. the concerned party contacts Troy & he responds with what information needs to be submitted (in this case perhaps just a very clear email?). Could be wrong, but I can't imagine them digging for any revision details of every gun on that long production gun list after the guns are first accepted. Good heads up. OH - Everybody knows there is a 2 ounce cushion above the weight listed on the list I assume. Appendix D4 item 18 for those who like to read along. Edited January 18, 2018 by IHAVEGAS Link to comment Share on other sites More sharing options...
IHAVEGAS Posted January 18, 2018 Share Posted January 18, 2018 On 1/5/2018 at 6:28 AM, MemphisMechanic said: Oh terrific. Now we have two weights for the same gun in the production list. I'm only seeing a maximum limit, so as long as we are good for the heaviest of the two then only one listed weight would be needed ? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now