waltherppq Posted October 31, 2017 Share Posted October 31, 2017 (edited) got a great deal from gs and need to try it on 9mm. impressive soft recoil and clean burn powder. only thing may concern someone is the “compress load”. when I charge 3.2 gr, and seating 147 to 1.135. the bullet base is barely touch the powder with only 0.01” gap. other then that, no complaints at all. here is the chrono data: the brass is much clean then the TG: and primer pocket looks fine for me,and no over pressure sign will use it as my primary pistol powder, as it is also fit 45 load. Edited October 31, 2017 by waltherppq Link to comment Share on other sites More sharing options...
BritinUSA Posted October 31, 2017 Share Posted October 31, 2017 Just a thought... you may want to blank out the name and address on that envelope. Link to comment Share on other sites More sharing options...
waltherppq Posted October 31, 2017 Author Share Posted October 31, 2017 1 hour ago, BritinUSA said: Just a thought... you may want to blank out the name and address on that envelope. thanks ‘^_^ Link to comment Share on other sites More sharing options...
muncie21 Posted October 31, 2017 Share Posted October 31, 2017 Thanks for the info OP. I load Prima V quite a bit. Your post provides motivation for me to work up some SV loads this winter. P.S. where did you get the SV from? Link to comment Share on other sites More sharing options...
waltherppq Posted October 31, 2017 Author Share Posted October 31, 2017 2 hours ago, muncie21 said: Thanks for the info OP. I load Prima V quite a bit. Your post provides motivation for me to work up some SV loads this winter. P.S. where did you get the SV from? grafs and 10 jugs save haz fee Link to comment Share on other sites More sharing options...
waltherppq Posted November 5, 2017 Author Share Posted November 5, 2017 settled in 3.2 sv and came back from a local match. it gave me no issues at all and softer recoil do help me a little bit. end up in 9th overall and 2nd in my division. Link to comment Share on other sites More sharing options...
Fantom919 Posted April 10, 2018 Share Posted April 10, 2018 (edited) Just wanted to add in my own data on this thread. Tried 3.2 of prima SV at 1.14 with blue bullets 147gr FP out of CZ SP01 Accushadow. 20 shot avg was 905 with std dev of 7.3. Will be my main practice powder once I finish the few pounds of Prima V left. It is a bit of a compressed load so I'm a little concerned if I try to make loads of my normal 147 Zero JHPs. If I try it I'll repost. Also nice that the prima SV is solid for my .40 loads. Not sure if prima V works well for .40. Edited April 11, 2018 by Fantom919 Link to comment Share on other sites More sharing options...
michael.flitcraft Posted April 10, 2018 Share Posted April 10, 2018 . Also nice that the prima V is solid for my .40 loads. Not sure if prima V works well for .40. Which is it?Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Fantom919 Posted April 11, 2018 Share Posted April 11, 2018 2 hours ago, michael.flitcraft said: Which is it? Sent from my iPhone using Tapatalk Sorry I edited my post. Prima SV works well for .40. Lots of posts on it. Not sure about Prima V. Link to comment Share on other sites More sharing options...
michael.flitcraft Posted April 11, 2018 Share Posted April 11, 2018 12 hours ago, Fantom919 said: Sorry I edited my post. Prima SV works well for .40. Lots of posts on it. Not sure about Prima V. No worries, just was hoping you'd clarify since they're different powders. Didn't want someone reading incorrect information and getting into trouble with it. Link to comment Share on other sites More sharing options...
d_striker Posted April 12, 2018 Share Posted April 12, 2018 (edited) I shot about 20k rounds using SV when I was shooting Production. 3.1gr with a plated 147 at 1.135"-1.140". Very consistent and accurate with very low SD's. No issues with temperature sensitivity either. It's interesting you guys are seeing compressed loads. I seemed to have plenty of room with the Xtreme 147 at 1.135"-1.140". From memory, I thought 3.1gr filled a little less than half of a 9mm case. Edited April 12, 2018 by d_striker Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now