Favorite 9mm Loads

[inertia]

On 12/28/2019 at 8:42 AM, LowSpeedHighDrag said:

 

I'm assuming that's a Steel Challenge load, because it's way under the required power factor for USPSA.  I use between 4.3 to 4.5 grains myself.

Agreed I need at least 4.0 320 to make pf with a 115HAP, 4.1 to be safe in my 6"

Also to chime in I have tested more than 20 PCC (MPX) loads and the 125HAP over 3.7 N320 is the most accurate that makes PF and runs my MPXs really well