resortboarder Posted October 6, 2016 Share Posted October 6, 2016 I've been shooting a Para Pro Custom 16.40 for about a year, and it took me from C-class to A-Class Limited, and I've had multiple people ask "Where did you find mags." Here's my story for the next person who searches on Google. My Para came with 2- 16rd magazines with removable basepads. I bought Dawson Tool-less base pads for the factory Para mags, and they worked flawlessly as 20rd reloadable mags for about 6 months. After the springs failed, I bought two Wolff +10% extra coil springs, cut to size and they have ran great ever since. After a few months, the MBX Para mags were released so I bought two and they have also run flawlessly ever since. I did buy two of the Greg Cote LLC ACT-Mags advertised to fit 16.40s with a small modification. I did the mod and they did work, but I had to heavily modify the follower to get 19rds reloadable. In the end, I ended up using the tubes when the anti-slip coating on my factory mags wore through, but they're otherwise only worth the $ if you're willing to sacrifice rd count. Note: Regarding Arrodondo springs & followers in 16.40 mags, those NEVER worked for me. Follower turned every time I shot the gun resulting in the same "salt shaker" effect. I sent them back to Dawson. Link to comment Share on other sites More sharing options...
tmz Posted October 6, 2016 Share Posted October 6, 2016 Thanks and good to know I picked up one of these guns for my son for Limited class and need to pick up a couple extra magazines. Thanks Link to comment Share on other sites More sharing options...
Titaniumbadger22 Posted October 9, 2016 Share Posted October 9, 2016 I use the Greg Cote ACT-Mags with Dawson extended base pads, Arrondondo springs and the follower that came with the ACT mags and get 20 rounds in mine. Work fine, had to file the top of the mag catch slot just a bit to get them to seat. Link to comment Share on other sites More sharing options...
resortboarder Posted October 11, 2016 Author Share Posted October 11, 2016 On 10/9/2016 at 6:35 PM, Titaniumbadger22 said: I use the Greg Cote ACT-Mags with Dawson extended base pads, Arrondondo springs and the follower that came with the ACT mags and get 20 rounds in mine. Work fine, had to file the top of the mag catch slot just a bit to get them to seat. Awesome. I tried the Arredondo spring and follower combination in my Greg Cote ACT-Mags too but got the "salt shaker" effect. Wonder why they work on some and not others. Link to comment Share on other sites More sharing options...
Titaniumbadger22 Posted October 13, 2016 Share Posted October 13, 2016 I didn't try the arredondo follower, just their spring with the stock ACT follower, not sure how different they are. Link to comment Share on other sites More sharing options...
fishpinoy27 Posted October 17, 2016 Share Posted October 17, 2016 On 10/5/2016 at 11:36 PM, resortboarder said: I've been shooting a Para Pro Custom 16.40 for about a year, and it took me from C-class to A-Class Limited, and I've had multiple people ask "Where did you find mags." Here's my story for the next person who searches on Google. My Para came with 2- 16rd magazines with removable basepads. I bought Dawson Tool-less base pads for the factory Para mags, and they worked flawlessly as 20rd reloadable mags for about 6 months. After the springs failed, I bought two Wolff +10% extra coil springs, cut to size and they have ran great ever since. After a few months, the MBX Para mags were released so I bought two and they have also run flawlessly ever since. I did buy two of the Greg Cote LLC ACT-Mags advertised to fit 16.40s with a small modification. I did the mod and they did work, but I had to heavily modify the follower to get 19rds reloadable. In the end, I ended up using the tubes when the anti-slip coating on my factory mags wore through, but they're otherwise only worth the $ if you're willing to sacrifice rd count. Note: Regarding Arrodondo springs & followers in 16.40 mags, those NEVER worked for me. Follower turned every time I shot the gun resulting in the same "salt shaker" effect. I sent them back to Dawson. Did you try to gauge Those pro custom mags with Dawson pads if it would pass? Link to comment Share on other sites More sharing options...
resortboarder Posted October 17, 2016 Author Share Posted October 17, 2016 1 hour ago, fishpinoy27 said: Did you try to gauge Those pro custom mags with Dawson pads if it would pass? I did, and they were still about 2mm short on the gauge. Plenty of extra room. Link to comment Share on other sites More sharing options...
thormx538 Posted October 20, 2016 Share Posted October 20, 2016 I have 4 MecGar Para P16 mags (bought from Greg Cote) w/ Dawson toolless basepads, and Arredondo springs/followers in them They all seem to work fine for me at 20rd, but I haven't tested them a ton yet since switching to Arredondo springs/followers (only a few hundred rounds). Link to comment Share on other sites More sharing options...
glockman75 Posted October 22, 2016 Share Posted October 22, 2016 I have great affection for MBX magazines. I think they are perfect. 100% reliable and I love the fit and finish. I also have Para factory magazines with Dawson Extended pads and Wolf springs and find factory mags a bit too square and clunky compared to the nice tapered angle that the MBX mags have. It really helps with fast reloads sliding into the gun. Go MBX! Link to comment Share on other sites More sharing options...
Anon Posted November 10, 2020 Share Posted November 10, 2020 (edited) Necro-thread.... it’s years later. What are good magazine options that exist for the P16? I don’t care about max round-count. I’d like reliable, last-round-slidelock, and works with a magwell. With the death of Para and Remington.... what options exist these days? Edited November 10, 2020 by Anon Link to comment Share on other sites More sharing options...
Bakerjd Posted November 12, 2020 Share Posted November 12, 2020 On 11/9/2020 at 8:57 PM, Anon said: Necro-thread.... it’s years later. What are good magazine options that exist for the P16? I don’t care about max round-count. I’d like reliable, last-round-slidelock, and works with a magwell. With the death of Para and Remington.... what options exist these days? So.... I personally used STI gen 2 mags. Sometimes they fit with out modifications to frame and sometimes they dont. If they dont it is very easy to cut the frame for them to fit. We do it a lot with Para style frames (Rock island double stack frames) at Prasky Gunworks. I personally just stopped using para style framed limited guns this season, sold my last one to a fellow shooter. Link to comment Share on other sites More sharing options...
Anon Posted November 12, 2020 Share Posted November 12, 2020 Thanks very much. I just picked up a Para P-16 Limited. I like Paras, but the mag thing will be cumbersome. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now