fishpinoy27

4.2 of N320 for a 200 SNS RN with groove at 1.200 gives me a 167 PF out of my Para Sight Tracker (Infinity barrel) with almost straight crimp with an undersize sizing die

Yes it will

12lb recoil spring,no shokbuff and 15 for my mainspring. 200 grains SNS coated with 4.3 of VV320 at 1.200 coal on my 16-40 pro custom sight tracker

That's a no go for USPSA

Get the Remington mags for their HiCap. Its identical and works. I have a couple of 16-40's and they are great guns

For USPSA, better chk the length with Dawson tooless pads, no more than 140mm

I might be interested with your Canadian 40 mags...

Not counting the gun, under 1K. Call Doug Jones http://www.acc-u-rail.com/

Thanks! That's one advantage I have, I run manually

Same as here. I just don't have an experience with ringed pockets

Doesn't the swagger get rid or detect a ringed primer pocket?

How many of you who had an experience a primer blowout/detonation with your 1050?

On a 550 case feeder, its so easy. Plunger wont go forward if wrong length of brass

Anybody invented a caliber specific case feeder adapter for 1050? I hate having 380 and 38 super mix with my 9mm. Like the 550 case feeder adapter, when a 380 or 38 super or even a 9x18 makarov would be mix, the plunger wont move forward because the next brass would be in the way. Plunger should be caliber specific too.

Thanks guys

Flash, can you specifically tell me the SPS mag and TTI pads for 40&9

If you are replacing a spring, go to wolff springs. I always replace magsprings from the getgo with wolff

Anybody tried this?

Lead cast are more accurate than plated but its a lot smokey.

MBX is making 10 round mags for Para

Start by laying a 800 grit sand paper in a flat surface and sand your slide side forward and back and forth. That is not a mirror finish. thats a typical two tone finish

Its runs 100% everytime.

I have a pro custom for Limited and No regrets

Sarco sells a magwell for Para/RIA made by Cheely

Yes, I am very happy with the performance of my ST. He is one the best smiths in the country. You would feel the difference when you are shooting a ST from a bushing barrel