Hennig Posted August 27, 2016 Share Posted August 27, 2016 (edited) Heya fellas, Just thought Id share the latest project - just got back from the smith a few days ago. Id been shooting a 9mm TS for a while now, loved it to bits. After competing with it for a while, I decided I wanted to move up to Major PF in STD, so set about acquiring a .357Sig TS (Im in Aus, so no .40 for me). I eventually tracked one down for a good price. Prior to going to the smith it had: -CZUB Grips -CZUB Magwell - CZUB Front Sight - LPA Adjustable rear I figured I may as well get it dolled up from the get go, so sent it off to the smith for: - Drilled and tapped frame, CMORE pattern, for the DAA Adjustable STD Thumbrest - Docked frame - Ball cuts the length of the slide. - Slide lightening cuts. - Cut dovetail for the Zigracker Standard Racker - Beadblasted This is what I got back: While the fixed TS rear sight is a perfectly serviceable racker, the new gun had a LPA adjustable rear, so I figured this was the perfect excuse to get a dedicated racker installed. Thumbrest is pretty nice, the adjustablity is nice - although for feel Id almost prefer the Advance Ratio Xcel thumbrest I had on the black gun. Because the DAA is designed for 19/2011s, it steps out to allow for the slide, which isnt needed in the CZ. I need to take maybe 3mm off the racker, and it will fit in the standard box. The RHS safety has been ground flat and recoated to allow for the racker and CZCustom Extended safety on the LHS. In the interim I also acquired a spare 9mm barrel, which has been fitted as well. I do all my own cerakote work, so I figured Id jump in and go with a custom gold blend (factory gold is a bit too yellow for my taste), and I love how it came out. This week Ill do the grips in black, and the magwell in gold. One of the boys from TFR did a quick photoshop. Will likely do the thumbrest and racker in black too. All ready for the match tomorrow - trial by fire! Edited August 27, 2016 by Hennig Img Tages Link to comment Share on other sites More sharing options...
JohanssonD Posted August 27, 2016 Share Posted August 27, 2016 Very nice! Link to comment Share on other sites More sharing options...
M1A4ME Posted August 27, 2016 Share Posted August 27, 2016 I'm curious about the slide. If you can't buy a .40 S&W pistol, did you have a 9MM slide opened up to accommodate the back end of the .357 SIG case or is it okay to buy a .40 S&W slide and have it shipped over there as long as you don't have the barrel, too? And, very pretty pistol, how does it shoot? My first CZ, a P07, I bought in .40 S&W specifically to then buy a 9MM barrel and have it rechambered to .357 SIG. I took it to the range to shoot and it did so well I wouldn't ever consider messing it up by having it converted to .357 SIG. So I bought a P09 in .40 S&W but so far haven't gotten around to having a 9MM barrel rechambered for it. I still need to do that (got a lot of .357 SIG brass/ammo in the shed since I no longer shoot my M&P .357 SIG.) Link to comment Share on other sites More sharing options...
Hennig Posted August 27, 2016 Author Share Posted August 27, 2016 1 hour ago, M1A4ME said: I'm curious about the slide. If you can't buy a .40 S&W pistol, did you have a 9MM slide opened up to accommodate the back end of the .357 SIG case or is it okay to buy a .40 S&W slide and have it shipped over there as long as you don't have the barrel, too? And, very pretty pistol, how does it shoot? My first CZ, a P07, I bought in .40 S&W specifically to then buy a 9MM barrel and have it rechambered to .357 SIG. I took it to the range to shoot and it did so well I wouldn't ever consider messing it up by having it converted to .357 SIG. So I bought a P09 in .40 S&W but so far haven't gotten around to having a 9MM barrel rechambered for it. I still need to do that (got a lot of .357 SIG brass/ammo in the shed since I no longer shoot my M&P .357 SIG.) Long story short, we can have .40s on a high cal license, but can't use them for ipsc. I have high cal endorsement, so could have bought this as a .40 and got a sig barrel, but was fortunate enough to come across one already done. Link to comment Share on other sites More sharing options...
Tok36 Posted August 28, 2016 Share Posted August 28, 2016 Great looking TS. Thank you for the post. Link to comment Share on other sites More sharing options...
adamge Posted August 28, 2016 Share Posted August 28, 2016 I like it! Link to comment Share on other sites More sharing options...
Hennig Posted August 29, 2016 Author Share Posted August 29, 2016 (edited) The bumblebee is done! Even fits in the box (the lid even shuts!) Edited August 29, 2016 by Hennig Link to comment Share on other sites More sharing options...
Bunsen Posted September 7, 2016 Share Posted September 7, 2016 Looks good! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now