wingnut Posted August 3, 2016 Share Posted August 3, 2016 Looking for some load data for SNS 135gr and 147gr with WFS out of my CZ. And making minor PF. Link to comment Share on other sites More sharing options...
oteroman Posted August 3, 2016 Share Posted August 3, 2016 135gr. 3.9gr. WSF 1.130oal Link to comment Share on other sites More sharing options...
oteroman Posted August 3, 2016 Share Posted August 3, 2016 128pf for above Link to comment Share on other sites More sharing options...
JLeeCZ Posted August 4, 2016 Share Posted August 4, 2016 (edited) SNS 147gr FP Coated NLG 3.8gr WSF 1.135 - 1.14 Federal primer 908 fps 15 shot avg Chrono using VP9. Have not chronoed with my SP01 or P07 but sure works great. Edited August 4, 2016 by JLeeCZ Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted August 4, 2016 Share Posted August 4, 2016 Don't forget The Plunk Test ... Link to comment Share on other sites More sharing options...
JLeeCZ Posted August 4, 2016 Share Posted August 4, 2016 I can load the 147 FP NLG out to 1.16(plunk/spin) in both the SP01 and P07 but don't need to. YMMV. Link to comment Share on other sites More sharing options...
IDescribe Posted August 4, 2016 Share Posted August 4, 2016 I'm pretty sure he was talking to the OP, but since you brought it up, I assume those barrels are reamed? There's always some variation, but the range for that standard 147grTCFP profile in CZ pistols seems to fall between 1.12 and 1.145. I don't think I've ever seen anyone getting a plunk and spin at 1.16 without reaming. Yes? No? Link to comment Share on other sites More sharing options...
oteroman Posted August 4, 2016 Share Posted August 4, 2016 At 1.160 you need to seriously look at your magazine functionality. Link to comment Share on other sites More sharing options...
JLeeCZ Posted August 4, 2016 Share Posted August 4, 2016 (edited) I'm pretty sure he was talking to the OP, but since you brought it up, I assume those barrels are reamed? There's always some variation, but the range for that standard 147grTCFP profile in CZ pistols seems to fall between 1.12 and 1.145. I don't think I've ever seen anyone getting a plunk and spin at 1.16 without reaming. Yes? No? Stock barrels. Tried the SNS 125 RN and couldn't go further than 1.09" in the SP01. Again, it was just a plunk and spin test with dummy rounds. Depends on the profile/ogive of the bullet. You can get a 100 round sample pack from SNS for 9 bucks. Edited August 4, 2016 by JLeeCZ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now