waktasz Posted May 16, 2016 Share Posted May 16, 2016 I seem to remember a photo of how/where on the barrel lug "peanut" to file if the gun is a little sluggish going into battery. My Classic 2 doesn't always want to close after slide lock reloads and is a little crunchy when racking the slide beck about 1/2 an inch. Little help? Link to comment Share on other sites More sharing options...
kneelingatlas Posted May 16, 2016 Share Posted May 16, 2016 I've never seen a tutorial, but this is the area of the peanut the slide stop rubs as the slide goes home:If you're going to work on the peanut, I suggest you use fine sandpaper only so you don't remove too much metal; this area is critical to the lockup, take too much metal from here and your accuracy will be lost. Link to comment Share on other sites More sharing options...
waktasz Posted May 16, 2016 Author Share Posted May 16, 2016 ok, that was my next question. What to use (sandpaper, small file, etc) and how. Thanks Link to comment Share on other sites More sharing options...
Nealio Posted May 17, 2016 Share Posted May 17, 2016 I would leave the peanut/bean alone unless you see some bur in there. Your barrel could be fit a little tight, which could also cause this. Link to comment Share on other sites More sharing options...
waktasz Posted May 17, 2016 Author Share Posted May 17, 2016 It definitely has a sharper corner on it than in my Stock 2s. I'll mark it up with a paint pen and see where it's hanging up Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now