Cpimike Posted May 2, 2016 Share Posted May 2, 2016 trying to find what is working the best for the new gun. Current load is: 6.8gr CFE Pistol 124gr Montana gold JHP 1.150 COAL 1390~ crono stock recoil spring (iirc 10lbs) still feels a little too snappy, like it is not working the comp enough to stay flat. Please only respond with what you are loading for the 9mm Major in the DVC Open. Thank you, Link to comment Share on other sites More sharing options...
Feegee Dean Matlock Posted August 28, 2016 Share Posted August 28, 2016 7.3gr of XP-100 125 gr BBI CCI small rifle primers OAL 1.165 PF 170 Will have a bunch more soon. Will be doing some load development over the next two weeks and will keep you up to date. Also will do quick some slow motion vids if you want. Link to comment Share on other sites More sharing options...
jcc7x7 Posted August 28, 2016 Share Posted August 28, 2016 Runs flat at 175pf with appropriate amount of autocomp or HS-6 Link to comment Share on other sites More sharing options...
Feegee Dean Matlock Posted August 28, 2016 Share Posted August 28, 2016 I have not pushed it to 175 yet but will do it this week for sure. What grain bullet, and amount of powder? Link to comment Share on other sites More sharing options...
jcc7x7 Posted August 28, 2016 Share Posted August 28, 2016 I run 124/5 Mg/HAP/PD Hollow points with Auto Comp and 115gr same as above with HS-6 Seems like the guns just flatten out at about 173-175PF 168-9 is quieter and politer in the hand but the dot bounce is irregular. at 175 it's seems like it never leaves the window. Just a straight up bounce and right back to the middle of the target. On the timer I'm 017-018 splits with 175PF and 018-020 at 168PF so I shoot the 175 PF stuff, cause the clock don't lie, LOL! Time is with A zone only hits. Lots of guys are faster than I am so your results my vary, only an A class shooter. Link to comment Share on other sites More sharing options...
Sarge Posted August 29, 2016 Share Posted August 29, 2016 4 hours ago, Feegee Dean Matlock said: I have not pushed it to 175 yet but will do it this week for sure. What grain bullet, and amount of powder? 175 really isn't pushing it much. My guns also run much better at around 174-175. Flatter and faster splits just like others mentioned. I don't have a DVC but it's just a full size 2011 like so many others. First thing I would do is respring it to 8 pounds as that's where most custom guns are sprung. That will have a major impact on the amount of dot movement alone. Link to comment Share on other sites More sharing options...
Feegee Dean Matlock Posted September 3, 2016 Share Posted September 3, 2016 Heck yea! Just adjusting to 175pf really helped the dot. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now