Malarkey Posted December 29, 2015 Share Posted December 29, 2015 What is your OAL with a 9mm limited pro? Link to comment Share on other sites More sharing options...
mrd Posted December 30, 2015 Share Posted December 30, 2015 OAL is depending on what kind of bullet is used. Without specifying a bullet, is there a point to the poll? Link to comment Share on other sites More sharing options...
Malarkey Posted December 31, 2015 Author Share Posted December 31, 2015 I think the OAL depends more on the chamber depth of the barrel than it does on the bullet being used. This was created to help me fix an issue i was having, but it ended up being completely unrelated. Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted December 31, 2015 Share Posted December 31, 2015 OAL depends more on the chamber depth than it the bullet being used. You, and MRD, are both correct, sort of ... Of course the OAL depends on the chamber depth, but your OAL will also change as you change the bullet - same chamber, different bullets - you might need a new OAL. Link to comment Share on other sites More sharing options...
Nealio Posted January 6, 2016 Share Posted January 6, 2016 1.13 should run most bullet shapes Link to comment Share on other sites More sharing options...
Malarkey Posted January 6, 2016 Author Share Posted January 6, 2016 The147 BBI seem to have to be around 1.10 --> 1.11. The higher end tends to get stuck in the rifling, and it gets a little hard to eject on the unload and show clear. The problem I was having was a stock 2 recoil spring made its way into my limited pro...does not work very well haha Link to comment Share on other sites More sharing options...
sti38super Posted January 7, 2016 Share Posted January 7, 2016 It really makes a difference in the bullets. .355 FMJ vs .356 coated . .355 will not hit the rifling as much as .356. Link to comment Share on other sites More sharing options...
Beastly Posted January 7, 2016 Share Posted January 7, 2016 1.095 with a Bayou Bullet 135 gr round nose. Link to comment Share on other sites More sharing options...
Nealio Posted January 16, 2016 Share Posted January 16, 2016 The147 BBI seem to have to be around 1.10 --> 1.11. The higher end tends to get stuck in the rifling, and it gets a little hard to eject on the unload and show clear. The problem I was having was a stock 2 recoil spring made its way into my limited pro...does not work very well haha Actually it should work about the same...? Link to comment Share on other sites More sharing options...
sporter Posted January 18, 2016 Share Posted January 18, 2016 It really makes a difference in the bullets. .355 FMJ vs .356 coated . .355 will not hit the rifling as much as .356. This has been my experience as well. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now