Hoosiershooter Posted July 8, 2015 Share Posted July 8, 2015 After reading the different topics around grips and sizes it made my head spin. I searched to see if there was a size chart, did t see one. I will make one so hopefully we can help others. I'll put some models down and if you can reply with a measured size across the thickest part of the grip I'll add it. Specify which grip as well. I'll try to create a spreadsheet to share. Sorry if this is already there, but I didn't see it. CZ Tac Sport: CZ SP01: CZ 97: Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
kneelingatlas Posted July 8, 2015 Share Posted July 8, 2015 The 97 with factory wood grips might be as big as it gets, but the TS with factory wood grips is close. The three guns you listed represent the three different frame sizes made by CZ: small frame (SP01), large frame (97B) and the TS/CM frame which is a unique wide bodied small frame designed for high capacity in .40. The terms "small frame" and "large frame" refer to the caliber the pistol was designed for. Small frame pistols were designed around the 9x19 cartridge, and were later adapted for other small frame calibers: .40 S&W, .357 SIG, .41 AE, etc.; large frame pistols were designed around the .45 ACP, then adapted for .38 Super, 10mm, 9x25 Dillon, ect. Large frame pistols can be chambered in small frame calibers (e.g. 19/2011, Tanfoglio Witness) but not vise versa. Because it's designed for large frame calibers, the 97 is longer from front to back, but the TS is a hair wider. Link to comment Share on other sites More sharing options...
MissionaryMike Posted July 8, 2015 Share Posted July 8, 2015 Would the P09/07 be considered small frame then? Link to comment Share on other sites More sharing options...
kneelingatlas Posted July 8, 2015 Share Posted July 8, 2015 I don't know much about the plastic guns, but I think they're wide small frames, maybe not as wide as the TS, but wider than the 75. Link to comment Share on other sites More sharing options...
Hoosiershooter Posted July 8, 2015 Author Share Posted July 8, 2015 Thanks for all the info Atlas. That is a great start. I should've been more specific though. I'm trying to make a chart for different grip panel sizes on different guns. Ie DAA, CZC, wood, VZ etc. but your info will help for sure. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Hoosiershooter Posted July 15, 2015 Author Share Posted July 15, 2015 Here is a great list provided by PRanta. I've tried to provide the most accurate links to all grips. "I've recorded SP-01 Shadow max. grip widths from different sources and measured some myself. Here is my list: 1.10" CZ UB - Al Grip Tape https://shop.cz-usa.com/ProductDetail/19091_Aluminum-Grips-Long-75ts-W-No-Magwell-Silver 1.12" CZ UB - Al Checkered https://shop.cz-usa.com/ProductDetail/19097_Diamond-Checkered-Black-Aluminum-Grips-7585sp01 1.12" Marschal Grips - CZ 75/85/SP-01 Thin Wooden 1.13" CZ Custom Shop - THIN AL Grips Aggressive Checker http://czcustom.com/cz_75-thin-grips-aggressive-checker.aspx 1.13" CZ Custom Shop - THIN AL Grip Tape http://czcustom.com/czgripsallongbronzethin.aspx 1.13" CZ Custom Shop - AL THIN TEX http://czcustom.com/czgripsallongblackthintex.aspx 1.16" DAA - Thin Al Grip Tape http://www.doublealpha.biz/daa-cz-sp01-grip 1.20" CZ Custom Shop - ARCHED AL Grips http://czcustom.com/czgripsallongblackarched.aspx 1.21" VZ Grips - Diamond Backs G10 http://czcustom.com/vzgripsblackcompact.aspx 1.21" VZ Grips - Tactical Diamonds G10 http://czcustom.com/vzgripstigerstripe.aspx 1.24" CZ Custom Shop - THICK AL Grips Aggressive Checker "The Lemon Graters" http://czcustom.com/cz-thick-grips-aggressive-checker.aspx 1.24" CZ Custom Shop - THICK AL Grip Tape http://czcustom.com/cz_75-thick-grips.aspx 1.25" CZ UB - Walnut Wood Tactical Sports Grip (1.35" on TS) http://czcustom.com/cztsgripswalnutwood.aspx 1.27" DAA - Thick Al Grip Tape http://www.doublealpha.biz/daa-cz-sp01-grip 1.33" Shooting Sports Innovations - CZ Scales (1.10" upper grip) http://www.shootingsportsinnovations.com/CZ-SCALES-BLACK-CZBLK001.htm 1.38" CZ UB - THIN Coco Bolo Grips http://czcustom.com/CZ_75-CZ_85-Thin-Coco-Bolo-Grips.aspx 1.43" CZ UB - Plastic grips https://shop.cz-usa.com/ProductDetail/19102_Plastic-Grips-Cz-7585 1.44" CZ UB - Rubber grips (1.39" upper grip) https://shop.cz-usa.com/ProductDetail/19102_Plastic-Grips-Cz-7585 I hope this helps. There is slight variation from frame to frame and grip to grip. Please add/correct dimensions. Thickness is not everything. The shape is even more important. Link to comment Share on other sites More sharing options...
Stuey Posted July 15, 2015 Share Posted July 15, 2015 Thanks for doing this, this helps. Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
PRanta Posted July 15, 2015 Share Posted July 15, 2015 (edited) This list is a great idea. Link to Marschal Grips is http://www.marschalgrips.com/?content=CZ-models . Please also note that CZ UB and CZC grips comes in different heights and colors. Links above lead only to one sample. Link to CZ UB Al Checkered is wrong. It leads to newer diamond checkered grips. CZ UB rubber grips link is http://czcustom.com/CZ_75-CZ_85-Full-Size-Rubber-Grips.aspx . Edited July 15, 2015 by PRanta Link to comment Share on other sites More sharing options...
Hoosiershooter Posted July 15, 2015 Author Share Posted July 15, 2015 Thanks PRanta for adding those and all the work you put in making the heart of the list. So are the checkered the new style with the CZ logo on the side? I'll update the list if so. Link to comment Share on other sites More sharing options...
PRanta Posted July 15, 2015 Share Posted July 15, 2015 (edited) In my list CZ UB Checkered is old style with CZ logo and light vertical grooves near the back edge (in brass: http://www.shop-cz.com/strenky-cz-75-sp01-tenke-mosaz/d-72049/ ). Diamond checkered is new style without CZ logo and smooth near the back edge. I just learnt they exists. Edited July 15, 2015 by PRanta Link to comment Share on other sites More sharing options...
MRevolutionIX Posted July 15, 2015 Share Posted July 15, 2015 Anybody try a set of CZ plastic grips that have been stippled? I just ordered some and will see how they turn out. Link to comment Share on other sites More sharing options...
PRanta Posted July 16, 2015 Share Posted July 16, 2015 I would like to try CZ UB plastic grips with epoxy glued Silicon carbide crystals. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now